neil101 Donating Members 123 Member For: 18y 6m 4d Gender: Male Location: Kurrajong Heights NSW Posted 21/06/15 11:59 AM Share Posted 21/06/15 11:59 AM Hi all,Wanting to know if anyone has used the project mu ns400 pads and has any reviewsI am currently running T3 slotted rotors and EBC redstuff pads, these pads are great good bite and little fade however having to constantly machine the rotors due to brake shudder is annoying and one of the guys from race brakes in Sydney said that the redstuff pads are the cause of the shudder reoccurring.So I'm going to be fitting new T3 rotors and different pads and the mu NS 400 pads sound okay on the website but just want know about the real world.Thanks Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 18y 6m 24d Gender: Male Location: Perth Posted 21/06/15 12:06 PM Share Posted 21/06/15 12:06 PM I use them front and rear in my 4 pot brembos. I rate them highly. Great bite,no fade ( on the street) and minimal dust. 1 Link to comment Share on other sites More sharing options...
PhilMeUp Member 1,045 Member For: 15y 8m 30d Gender: Male Location: Perth, Western Australia Posted 21/06/15 08:08 PM Share Posted 21/06/15 08:08 PM ...however having to constantly machine the rotors due to brake shudder...Suspension control arm bushes? What model is it, BA/BF or FG? Link to comment Share on other sites More sharing options...
neil101 Donating Members 123 Member For: 18y 6m 4d Gender: Male Location: Kurrajong Heights NSW Posted 21/06/15 08:23 PM Author Share Posted 21/06/15 08:23 PM Ba and control arm bushes were done ages ago I nolathane bushes in the lower control arms Link to comment Share on other sites More sharing options...
MR_FG_09 Donating Members 95 Member For: 12y 5m 1d Gender: Male Posted 29/06/15 12:53 PM Share Posted 29/06/15 12:53 PM Anyone tracked their car with the NS400's fitted? Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 18y 6m 24d Gender: Male Location: Perth Posted 29/06/15 01:11 PM Share Posted 29/06/15 01:11 PM If you want to track it go for the ns800 mate. The 400s are a street pad. Link to comment Share on other sites More sharing options...
discostig Manual mode ________________________ All day, erryday Donating Members 13,798 Member For: 16y 4m 22d Gender: Male Location: Probably above atmospheric pressure Posted 29/06/15 01:39 PM Share Posted 29/06/15 01:39 PM ns800 - 800° max?ns400 - 400° max? Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 18y 6m 24d Gender: Male Location: Perth Posted 29/06/15 01:40 PM Share Posted 29/06/15 01:40 PM Correct Link to comment Share on other sites More sharing options...
discostig Manual mode ________________________ All day, erryday Donating Members 13,798 Member For: 16y 4m 22d Gender: Male Location: Probably above atmospheric pressure Posted 29/06/15 01:43 PM Share Posted 29/06/15 01:43 PM Eff orr seeSee? Link to comment Share on other sites More sharing options...
kb351 Donating Members 80 Member For: 16y 6m 15d Gender: Male Location: Perth Posted 13/07/15 06:26 AM Share Posted 13/07/15 06:26 AM Hi All,I'm doing the rotors and pads for my BF Typhoon.Currently has standard from factory Brembo front rotors and 4 pot Calipers with Single rear PBR caliper and rotor.Is it right that these DBA replacement rotors are OK? front - 42102 T3 and rear 42108 xs.I want to run the Project Mu Ns400 pads but aren't sure, the fronts look like they would be F1040 but I cant see which ones would suit the rears?I'm guessing Ralph could wade in on this one? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now