Liam Jay New Member 1 Member For: 8y 11m 8d Posted 16/05/15 11:20 AM Share Posted 16/05/15 11:20 AM Looking to improve my cars performance (2009 xr6). Can anyone help me out with any recommendations please I was thinking something like either1. New exhaust2. New computer (electronics)3. Cold air intakealso looking to put a turbo in it but that's later down the track.Cheers Liam Link to comment Share on other sites More sharing options...
FiftyOne Bronze Donating Members 1,145 Member For: 10y 9m 23d Gender: Male Posted 16/05/15 12:09 PM Share Posted 16/05/15 12:09 PM Welcome Liam. You've come to a good place with many wise headsYou'll probably need to tell us a little more about the car and what you hope to achieve, current work, etc etcfyi, the barra motor and the barra turbo's aren't really the same engine. There are a lot of small differences that differentiate them. Also, the Ford EEC ecu's are a very well featured ecu. the xcal tuners make good use of the stock functionality, not many people replace them. If it were me, again not knowing you or the car, I would mod the front of the stock airbox, put some 1000'cc injectors in (the proper flow matched ones) and give it a very quick run on a dyno. Maybe if you were keen throw a set of cams at it Link to comment Share on other sites More sharing options...
Pixy Angel Expert Donating Members 9,132 Member For: 19y 1m 28d Gender: Male Location: North Jamberoo, NSW Posted 16/05/15 12:44 PM Share Posted 16/05/15 12:44 PM mate if you are wanting to put a Turbo in it would be easier to trade in and get a Turbo XR6 or G6E and or F6 pending budget. 1 Link to comment Share on other sites More sharing options...
RB Snake Donating Members 327 Member For: 10y 4m 2d Gender: Male Location: Perth SOR Posted 16/05/15 12:51 PM Share Posted 16/05/15 12:51 PM Don't mod tha NA xr6 it'll just make it harder to sell it when you want to get the turbo model. Fill it with 98 fuel and put a k&n air filter that's all you need. Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 18y 7m 1d Gender: Male Location: Perth Posted 16/05/15 12:54 PM Share Posted 16/05/15 12:54 PM ^this, and don't forget the nitrous, don't ever forget the nitrous. 2 Link to comment Share on other sites More sharing options...
Lennox Member 2,586 Member For: 11y 1m 29d Gender: Male Location: Perth Posted 17/05/15 09:13 AM Share Posted 17/05/15 09:13 AM Did somebody just suggest 1000cc injectors for an n/a falcon Link to comment Share on other sites More sharing options...
JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 15y 10m 24d Gender: Male Location: Adelaide Posted 17/05/15 09:38 AM Share Posted 17/05/15 09:38 AM (edited) Yes and they shouldn't have We had done some work on a mates BF XR6 all we did was a custom stock ecu re calibration and picked up 20rwkw on BP98 fuel This had pacemaker 4490's 100cell cat , K&N panel filter , hi flowed stock air box and we back to backed a 2.5 redback exhaust against a 2.5 xforce cat back Redback won bugger all in it but it was on top and cheapest cat back on the market Rolled up 154rwkw then 174rwkw after alot of calibrating Go get em dude everyone has a turbo and if you're a P plater it's your only decent option Edited 17/05/15 09:47 AM by Wombat Bellend 1 Link to comment Share on other sites More sharing options...
FiftyOne Bronze Donating Members 1,145 Member For: 10y 9m 23d Gender: Male Posted 17/05/15 09:48 AM Share Posted 17/05/15 09:48 AM There are a lot of people around here that get really butt hurt about someone elses opinion Link to comment Share on other sites More sharing options...
JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 15y 10m 24d Gender: Male Location: Adelaide Posted 17/05/15 09:52 AM Share Posted 17/05/15 09:52 AM Opinions are for people who don't know 2 Link to comment Share on other sites More sharing options...
Mrs Jeturbo Bob the Freaking Builder Donating Members 10,805 Member For: 14y 7m 11d Gender: Female Location: SA Posted 17/05/15 10:20 AM Share Posted 17/05/15 10:20 AM Why would u need that much capability in an injector in an n/a car ... Just wasting the guys cashola imo Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now