Jump to content

Recommended Posts

  • Member
  • Member For: 10y 5m 28d

Mine manual with a 26" radial and 3.7 in my 9 inch was crossing at 6500rpm for 135mph you'll need to lift the limited as with your power you should be at close to 135. Also you will need to go 3-400 rpm above what you expect to cross the line at. Only other option you have is to fit a 28" tire which you will have to lift it and get a big hammer out to make fit and even then it will only just get you 135mph at 6000rpm which will still need the limiter raised

Link to comment
Share on other sites

  • Bronze Donating Members
  • Member For: 12y 8m 8d

Yeah thanks. It's what I thought.

I recon I can get a 235/60 (or 65) R17 from a territory under it without issues as I've had 275/35r20's under it without a sweat.


Anyone run a territory tyre down the drags ?

Link to comment
Share on other sites

  • 2 weeks later...
  • less WHY; more WOT
  • Site Developer
  • Member For: 15y 11m 19d
  • Gender: Male
  • Location: Melbourne

well done on making that pusher. it's a lot cheaper to buy the bearing and not the hub itself, so you've done well there.

  • Like 1
Link to comment
Share on other sites

  • 2 weeks later...
  • Bronze Donating Members
  • Member For: 12y 8m 8d

430 Kay's over yesterday and today. Smoked a set of tyres in the second session, then did another 5 sessions on my 20" tyres.

Car never missed a beat. Built Ford tough. #Barralyf

Powercruise was absolutely mint today. Did 7 sessions, could have done more, and it flowed real well. Highly recommend

c90dc7afc3d401075f5d52f3fab97dcf.jpgdd1a350722cb6265cc77b0b125e196f0.jpg

  • Like 3
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'