Mr_4.0 Member 1,096 Member For: 13y 3m 5d Posted 23/04/13 10:52 AM Share Posted 23/04/13 10:52 AM What prices are we talking for both complete kits? Link to comment Share on other sites More sharing options...
exarsixt Member 21 Member For: 12y 1m 18d Gender: Male Location: Adelaide Posted 23/04/13 11:37 AM Author Share Posted 23/04/13 11:37 AM Like 1400 compared with 1900 I thinkBut that's with a large hotside pipe. Link to comment Share on other sites More sharing options...
Peppy_t92 Silver Donating Members 748 Member For: 11y 21d Gender: Male Location: Liverpool Posted 23/04/13 12:03 PM Share Posted 23/04/13 12:03 PM I paid $2400 for the 2.2 kit and hot side piping from Kevin (ProcessWest), I also picked it up myself though to save the shipping, plus I was very excited to install it. Link to comment Share on other sites More sharing options...
knoles Donating Members 390 Member For: 13y 1m 7d Gender: Male Location: Port Hedland Posted 23/04/13 02:17 PM Share Posted 23/04/13 02:17 PM Theres $100 difference between the pw stg 2 and the nizpro stg 1 Link to comment Share on other sites More sharing options...
MiKa Donating Members 4,243 Member For: 17y 8m 3d Gender: Male Location: Melbourne, VIC Posted 24/04/13 01:38 AM Share Posted 24/04/13 01:38 AM Mika, did you polish your cooler?Nah it's not polished. When I installed it I tried to get it as centered as possible.. Link to comment Share on other sites More sharing options...
exarsixt Member 21 Member For: 12y 1m 18d Gender: Male Location: Adelaide Posted 24/04/13 09:24 AM Author Share Posted 24/04/13 09:24 AM I'm assuming your is the 'raw' state then Mika, looks awesome. 1 Link to comment Share on other sites More sharing options...
tofski Member 25 Member For: 12y 17d Posted 24/04/13 10:04 AM Share Posted 24/04/13 10:04 AM I installed a nizpro coller and adapted a proccess west throttle body relocation kitThe result was 360rwkw @ 15 psi std motor n nizpro 4 inch exh ,just my experience.Both coolers are good enough for easy 400kw just depends on which look u like. 2 Link to comment Share on other sites More sharing options...
exarsixt Member 21 Member For: 12y 1m 18d Gender: Male Location: Adelaide Posted 25/04/13 02:38 AM Author Share Posted 25/04/13 02:38 AM I ended up purchasing the process west stage 2 and a hot side pipe, im sure this will be ample for my requirements. Keen to see photos from others! Also, peoples experiences with under battery intakes? Iv heard mixed reviews?Btw. Kevin is a really nice guy at processwest, very happy with his service.Tofski what other mods are you using to make that power? 1 Link to comment Share on other sites More sharing options...
rednose RNS10S Donating Members 2,229 Member For: 17y 8m 7d Gender: Male Posted 25/04/13 07:26 AM Share Posted 25/04/13 07:26 AM I run the PW 2.2 with the udp, car has seen as high as 417 rwkw on the Autotech dyno, has run a 10.91 @ 131.9 MPH and has seen a highest MPH of 134.56, factory turbo and manifolds on e-flex. Would highly recommend this kit as it works well. 1 Link to comment Share on other sites More sharing options...
tofski Member 25 Member For: 12y 17d Posted 25/04/13 08:45 AM Share Posted 25/04/13 08:45 AM Tofski what other mods are you using to make that power?Other mods include wasregate mod ,4' nizpro exh ,injectors pump,4' intake from plazmaman and cooler ,tuned by cv ,could got more power but wanted to keep it safe and traction is hard to get on the street as it is even with semi slicks .its a ex chaser bf 2 std motor unopened with 110k kms ,btw its my wife's car with 2 baby seats in the back .To make good reliable power all you need is remove all the restrictis as possible ,make the motor breathe easy and power will come after it all about efficiency. 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now