jas98 Member 1,029 Member For: 11y 8m 27d Gender: Male Location: Maryborough Qld Posted 26/02/13 06:45 AM Share Posted 26/02/13 06:45 AM Hi on a BA xr6t sedan.Ok goes like this, all new bush's, and rose joints (all 6) spring seats etc. (shocks and springs still original though0going over hard bumps theres a very noticable loud clunk/knock/clunk/knock etc, ive been under it checked everything and all seems good and fine (only 3000k's since replaceing it all)could it be the drive/half shafts? as they goe allot of play in em (replaceing them soon)what else could it be? shocks? the stabaliser bar/s are fine/newdoing my head in!! Link to comment Share on other sites More sharing options...
bionicxr6t05 Bronze Donating Members 2,216 Member For: 12y 8m 23d Gender: Male Posted 26/02/13 07:47 AM Share Posted 26/02/13 07:47 AM Rear swaybar links can knock like that Link to comment Share on other sites More sharing options...
jas98 Member 1,029 Member For: 11y 8m 27d Gender: Male Location: Maryborough Qld Posted 26/02/13 09:06 AM Author Share Posted 26/02/13 09:06 AM (edited) will take em off and check em the top of them are nothane but useing original bottom so maybe lower bush in its f*cked?, cheersalso can stuffed bump stops cause it? cars standard xr6t suspension, however right bump stops f*cked, also noticed that its about 5 mm from hitting arm? and lefts almost hitting Edited 26/02/13 09:07 AM by jas98 Link to comment Share on other sites More sharing options...
Rootster Just a large member member Silver Donating Members 3,125 Member For: 15y 6m 3d Gender: Male Location: sydney Posted 26/02/13 09:37 AM Share Posted 26/02/13 09:37 AM sure the spare wheel or something else isnt loose in the boot? Link to comment Share on other sites More sharing options...
jas98 Member 1,029 Member For: 11y 8m 27d Gender: Male Location: Maryborough Qld Posted 26/02/13 10:16 AM Author Share Posted 26/02/13 10:16 AM will check, also forgot to mention it kinda feels like the arse end sways abit at same time, althogh tyres are farked!! (replaced very very soon) Link to comment Share on other sites More sharing options...
discostig Manual mode ________________________ All day, erryday Donating Members 13,798 Member For: 16y 4m 26d Gender: Male Location: Probably above atmospheric pressure Posted 26/02/13 12:48 PM Share Posted 26/02/13 12:48 PM Rear wheel bearings? I think I had wandering arse end when one of mine was shot but it was wet too at the time so not conclusive. Easy to rule out anyway, jack up and wobble. Wheel align shop didn't manage to find this for me only a month prior... Link to comment Share on other sites More sharing options...
jas98 Member 1,029 Member For: 11y 8m 27d Gender: Male Location: Maryborough Qld Posted 27/02/13 12:05 AM Author Share Posted 27/02/13 12:05 AM rear wheel bearing's seem ok but changing them at same time a cv shaftsOk, cheked it over again, could it be the sh*tty rubber control blade bush's I used? they were very soft compared to the factory ones, As this noise only happens when hiting bumps (very loud bang) and at same time car wanders in the arse end. (also waders a bit othertimes) Link to comment Share on other sites More sharing options...
sexual harrassment panda I see a red door and I want to paint it black Donating Members 5,919 Member For: 14y 5m 25d Gender: Male Location: Far north queensland Posted 27/02/13 12:38 AM Share Posted 27/02/13 12:38 AM diff bushcheers 1 Link to comment Share on other sites More sharing options...
jas98 Member 1,029 Member For: 11y 8m 27d Gender: Male Location: Maryborough Qld Posted 27/02/13 01:09 AM Author Share Posted 27/02/13 01:09 AM ^lol.......probs Link to comment Share on other sites More sharing options...
flickinmic Member 19 Member For: 11y 4m 20d Gender: Male Location: Brisbane South Side Posted 28/03/13 03:07 AM Share Posted 28/03/13 03:07 AM Hi Hope you have fixed it but if not I’ve got something worth looking at.If you have fitted a towbar have a look at the rear muffler and see if it’s not hitting the bolt of the towbar.If so put a little nut in the holes of the rear exhorts mount and the zip tie the middle to stiffen up the rubber mount.Let me know how you go. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now