Jump to content

6 Speed Zf Transmission Possibly Blown At 100Kmh.... What To Do Now?


Lime Turbo

Recommended Posts

  • Donating Members
  • Member For: 12y 10m 2d
  • Gender: Male
  • Location: Perth

Thanks Paulie,

So any recommendations on rebuild? Nizpro input shaft and 3000rpm high stall? Any places close to rockingham that does rebuild, Thoughts?

Link to comment
Share on other sites

  • Donating Members
  • Member For: 15y 4m 6d
  • Gender: Male
  • Location: SE Melbourne

no prob mate.

probably best to send the box to xft (simon) or monsta torque (rob).

give them a call and discuss options. There are heaps of parts available for these boxes now.

  • Like 1
Link to comment
Share on other sites

  • GONE FULL WIZARD
  • Donating Members
  • Member For: 15y 2m 22d
  • Gender: Male
  • Location: 720 East Kensington Road

Take it to XFT in Perth, Simon will sort you out easily and from what I hear may have some new tricks with the ZF.

Link to comment
Share on other sites

  • Donating Members
  • Member For: 12y 10m 2d
  • Gender: Male
  • Location: Perth

Ok so if anybody is interested, a complete rebuild with hardened internals and Nizpro billet input shaft, drive away is $4250... not really that bad :) .......just didn't need it to happen right now haha

Also I got told deka 80lb injectors and my 12psi actuator coming from rapid systems are s**t? what do you guys think?

And from what I told you already what am I missing to hit the 370kw at the wheels mark?

Thanks again :)

Link to comment
Share on other sites

  • Member
  • Member For: 13y 2m 10d
  • Gender: Male
  • Location: Auckland, New Zealand

Just before you commit to the trans rebuild you could take a peek through the inspection plate where you do up the torque converter bolts and check the flex plate is still bolted to the engine and torque converter. Just give it a wriggle by hand to confirm or get someone to move the front pulley back and forth with a socket while you watch the flex plate :)

Link to comment
Share on other sites

  • Donating Members
  • Member For: 15y 4m 6d
  • Gender: Male
  • Location: SE Melbourne

And from what I told you already what am I missing to hit the 370kw at the wheels mark?

Thanks again :)

surge tank with 044, e85 tune and valve springs

also dont forget to get your turbo housing ported.

Edited by Paulie2256
Link to comment
Share on other sites

  • Donating Members
  • Member For: 12y 10m 2d
  • Gender: Male
  • Location: Perth

Riptide:

Thanks for that, I'll have to see what I can do :)

Bigkeels:

That price is from XFT, with clutch plates fully rebuilt and Nizpro input shaft. Standard stall I think, and I'll have to ask about the trans cooler coz from what I've been told I don't think it comes with one.......but he did say drive away so I should get more info from what I will be driving away with haha

Paulie:

Thanks again mate, I thought surge tank was a backup? As in when you were low on fuel you can't punch it too hard, which I don't on low fuel anyway. Is the Walbro 300 lt ph not enough?

Also is it still nesersary to change the valve springs, I though BF MK2 had typhoon springs?

BPT are doing the tune, should I get the 1.2K plenum upgrade? Will this help.

Regards

Link to comment
Share on other sites

  • Donating Members
  • Member For: 15y 4m 6d
  • Gender: Male
  • Location: SE Melbourne

300lt ph is plenty but you still run a risk of fuel surge with a full tank. Its not required for power but it depends on how safe you want it to be.

pretty sure you wont need the plenum at 370 but it wont hurt.

and your springs will go soft trust me. better of putting crow springs in early and not worry about it down the track.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'