OZYWALKER XR50T Gold Donating Members 2,795 Member For: 10y 11m 21d Gender: Male Location: Western Sydney Posted 29/12/18 12:29 AM Share Posted 29/12/18 12:29 AM I used all the Mal wood lines, CSC and master cylinder.Just the Xtreme clutch itself was used.Really annoyed that it was the line that went. Link to comment Share on other sites More sharing options...
JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 15y 10m 22d Gender: Male Location: Adelaide Posted 29/12/18 01:48 AM Share Posted 29/12/18 01:48 AM (edited) Yeh that’s fair average indeed could be the fact your CSC spacing is incorrect and once fully extened piston on the CSC is maxed out of the pressure plate fingers the fluid has nowhere to go and blew out the line ? how many shims do you have behind the CSC ? On FG I find x1 1mm one is perfect ? Edited 29/12/18 01:49 AM by JETURBO Link to comment Share on other sites More sharing options...
OZYWALKER XR50T Gold Donating Members 2,795 Member For: 10y 11m 21d Gender: Male Location: Western Sydney Posted 29/12/18 02:08 AM Share Posted 29/12/18 02:08 AM Was 1mm.Next question is how much better is the NPC twin plate race kit over the Xtreme twin plate race kit?I know the NPC has the centre hub so there's no chance of twisting the input shaft with it, asides from that what's the go? More clamping pressure than the Xtreme (1350kg I believe)Any specs you'd care to share jet?I know the Xtreme is gonna be a heap cheaper so unless there's something brilliant about the NPC I'll get another Xtreme kit. Link to comment Share on other sites More sharing options...
arronm Dropping a turd Gold Donating Members 9,520 Member For: 16y 5m 27d Gender: Male Location: Perth Posted 29/12/18 03:00 AM Share Posted 29/12/18 03:00 AM If the kits not old just show in new plates. My Xtreme plates still holding up since 2010. 1 Link to comment Share on other sites More sharing options...
El Andrew Gold Donating Members 2,019 Member For: 9y Gender: Male Location: Canberra ACT Posted 29/12/18 05:37 AM Share Posted 29/12/18 05:37 AM Was putting the car up on stands and it swung very slightly as I was jacking for the third stand. (Pivoted on the one wheel that was on the ground and I think I had slightly lifted it off one of the other stands). I was well out of the way as always and the car didn't drop or anything, but the corner of the front bumper tagged the roller door guide. Bar will need a spray now.I guess when you DIY, the thousands you save offset any occasional stuff ups. Still pretty pissed at myself though. 2 Link to comment Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 28,298 Member For: 16y 13d Gender: Male Location: Melbourne Posted 29/12/18 05:49 AM Share Posted 29/12/18 05:49 AM ouch... Link to comment Share on other sites More sharing options...
El Andrew Gold Donating Members 2,019 Member For: 9y Gender: Male Location: Canberra ACT Posted 29/12/18 06:01 AM Share Posted 29/12/18 06:01 AM Ouch indeed... Edit: that squiggly line is just light reflecting off the bar Link to comment Share on other sites More sharing options...
Rab WOT? Moderating Team 10,980 Member For: 11y 1m 28d Gender: Male Location: Frankston, 3199 Posted 29/12/18 06:05 AM Share Posted 29/12/18 06:05 AM Very ouch :( Link to comment Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 28,298 Member For: 16y 13d Gender: Male Location: Melbourne Posted 29/12/18 06:05 AM Share Posted 29/12/18 06:05 AM yeah; figured as much that the squigglies aren't a worry, but still, sucks to have that happen :( Link to comment Share on other sites More sharing options...
Puffwagon Puff Gold Donating Members 15,123 Member For: 9y 2m 24d Gender: Male Location: South Australia Posted 29/12/18 07:12 AM Share Posted 29/12/18 07:12 AM That sucks. I reversed my car into a pole in my backyard a couple of years ago. It barely scraped the rear guard but enough to get through to the primer. Funny thing is the reverse sensor was going off and I couldn't see anything so I was like wtf is going on...then I touched it. Not as bad as yours though mate. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now