Jump to content

What Did You Do To Your Car Today?


Henz

Recommended Posts

  • less WHY; more WOT
  • Site Developer
  • Member For: 15y 11m 19d
  • Gender: Male
  • Location: Melbourne

yes, and you'll find the size of that filter is huge in comparison to the one that's sandwiched into the oil feed line itself which means it's almost impossible to block the entirety of the flow (unless something far more catastrophic happens), which is fine, but it's essentially useless in that position, still.

  • Like 1
Link to comment
Share on other sites

  • Donating Members
  • Member For: 5y 10m 20d
11 hours ago, Slowxr6t said:

Are you saying its ok to have no filter on the turbo oil feed line? That doesn't sound very clever.

you mean like nearly every other turbo car ever made?

 

truck knows why ford put one in + why they put it in such a stupid location is also beyond me.

 

If you doing your regular serving you wont ever need a turbo oil filter.

if your being a Muppet and leaving your servicing for once in a  blue moon then your turbo filter will clog and you will lose your turbo, but your motor will still chug on till the oil gets to thick to move around the bearings. 

 

Sure a braided line with a filter in a serviceable location makes more sense then whats ford did, but also you dont really need a filter.

  • Like 1
Link to comment
Share on other sites

  • ...JD TUNING ADELAIDE...
  • Gold Donating Members
  • Member For: 15y 9m 27d
  • Gender: Male
  • Location: Adelaide

A factory AFL 101 oil filter will remove more particles than any inline oil filter cartridge as per when above just said ;) 

 

True story is true .... 

  • Like 1
Link to comment
Share on other sites

  • Feeling the Love :-)
  • Bronze Donating Members
  • Member For: 10y 11m 27d
  • Gender: Male
  • Location: Cairns

been meaning to clean my air filter for months

cant remember when I did it last, so that means at least 12 months ago if not more

the problem with getting old is time seems to have an exponential acceleration and if you think you did something 6 months ago, turns out it was 18 months ago

anyways I pulled it out and cleaned it, looked dirty in the airbox but wasn't all that dirty really 

Oh well, I've got plenty of spare time on my hands............

 

brMTL8z.jpg

 

 

 

not even that dirty

 

qg9rJOh.jpg

  • Like 1
Link to comment
Share on other sites

  • 2 weeks later...
  • XR50T
  • Gold Donating Members
  • Member For: 10y 10m 28d
  • Gender: Male
  • Location: Western Sydney

Started the yoot in loud mode 20 minutes ago.

Told the neighbours I had to get tools out of the garage.
Just wanted to hear overly loud barra with cams, didn't mention I'd let it idle for 10 min whilst I tried to look busy.

And it's only Wednesday, good luck the rest of this week lol.

  • Like 4
Link to comment
Share on other sites

  • Silver Donating Members
  • Member For: 11y 5m 23d
  • Gender: Male
  • Location: Griffith NSW

Cleaned the fg coolant bottle, not perfect but much better.
Chlorine bleach, dishwasher tablet and rock salt as the abrasive scrubber. Didn't want to use rice like the internet says because of all the bottles little chambers. 7f61c6b3382422a2a22c11e60e46c5e0.jpg

Link to comment
Share on other sites

  • Silver Donating Members
  • Member For: 11y 5m 23d
  • Gender: Male
  • Location: Griffith NSW

Next up is exhaust manifold turbo rebuild.
New turbo core, gaskets, braided water line and weird ass Mamba stud kit and Norlock washers.
I'm going to run all mating surfaces over with sand paper before I reassemble.

Should I basically be tightening everything as tight as I can with a ring spanner or should I get the Ugga dugga out? Don't have a torque wrench or any common sence on hand lol1be26ef00bcac40ad3b3f8d88179382d.jpg

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'