arronm Dropping a turd Gold Donating Members 9,520 Member For: 16y 5m 27d Gender: Male Location: Perth Posted 15/03/12 10:32 AM Share Posted 15/03/12 10:32 AM You should save your money , and just change fronts. Grab some early fpv calipers, the discs are 32mm thick and 325mm in diameter. These are the best low price upgrade. Link to comment Share on other sites More sharing options...
genebaby Abuser of Charvels Member 501 Member For: 20y 4m 12d Gender: Male Location: Canberra Posted 15/03/12 10:39 AM Share Posted 15/03/12 10:39 AM Any change in rotor means a change of caliper and vice versa, they have to match and suit the vehicle. Link to comment Share on other sites More sharing options...
MiKa Donating Members 4,243 Member For: 17y 8m 2d Gender: Male Location: Melbourne, VIC Posted 15/03/12 12:12 PM Share Posted 15/03/12 12:12 PM Gene what sort of $$$ would you be after for yours? Link to comment Share on other sites More sharing options...
genebaby Abuser of Charvels Member 501 Member For: 20y 4m 12d Gender: Male Location: Canberra Posted 15/03/12 12:47 PM Share Posted 15/03/12 12:47 PM Hi MiKa, I don't really want to post it all out, it's way heavy, as you would know. I was thinking $500 for the lot for a local buyer? They've just kinda been sitting there. I was bummed one got the brake fluid on it, it doesn't look as good as the other. Link to comment Share on other sites More sharing options...
Shyfrd Turboless Donating Members 5,992 Member For: 13y 1m 27d Gender: Male Location: Geelong, Victoria Posted 15/03/12 07:59 PM Share Posted 15/03/12 07:59 PM Can't it be machined to get rid of the oil? Link to comment Share on other sites More sharing options...
genebaby Abuser of Charvels Member 501 Member For: 20y 4m 12d Gender: Male Location: Canberra Posted 15/03/12 09:01 PM Share Posted 15/03/12 09:01 PM Sorry, I may have worded it badly, the issue is cosmetic on one caliper, the red part does not look as nice as when I drove it on for the swap over. The rotors are fine. Link to comment Share on other sites More sharing options...
MiKa Donating Members 4,243 Member For: 17y 8m 2d Gender: Male Location: Melbourne, VIC Posted 15/03/12 09:56 PM Share Posted 15/03/12 09:56 PM Hi MiKa, I don't really want to post it all out, it's way heavy, as you would know.I was thinking $500 for the lot for a local buyer? They've just kinda been sitting there. I was bummed one got the brake fluid on it, it doesn't look as good as the other.All good mate was just curious more than anything...Cheers. Link to comment Share on other sites More sharing options...
Pazzo Donating Members 11,132 Member For: 13y 6m 1d Gender: Male Posted 15/03/12 10:11 PM Share Posted 15/03/12 10:11 PM Mika, just put your name down at FTG so when a set comes in your the first person they ring. I have done it for seats and they have no probs about doing it. Link to comment Share on other sites More sharing options...
JGP Donating Members 309 Member For: 13y 7m 26d Gender: Male Posted 15/03/12 11:27 PM Share Posted 15/03/12 11:27 PM Mika, ask sundeep(advertising engine in classifieds) he is currently wrecking a F6 and has plenty available Link to comment Share on other sites More sharing options...
neil101 Donating Members 123 Member For: 18y 6m 11d Gender: Male Location: Kurrajong Heights NSW Posted 17/03/12 10:50 PM Share Posted 17/03/12 10:50 PM No bf brakes = also rubbish.Heat them up just a tiny bit and they warp.I upgraded to bf brakes all round on my car used DBA 4000 slotted and bendix heavy duty and it stops heaps better and I'v had no warp issues as yet and they've been on the car for nearly 20,000kms and done a track day.So if/when you can afford it highly recommend this upgrade unless you can afford ap racing then go them Neil Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now