1600dave Donating Members 872 Member For: 13y 3m 8d Posted 27/05/11 01:13 AM Share Posted 27/05/11 01:13 AM Just need to know what size our hubs are I.e centre of the wheel as I'm changing the wheels over and the new rims will have a 73.1mm centre bore.Car is a BF MK2Thanks,Dave Link to comment Share on other sites More sharing options...
winstor Member 611 Member For: 15y 1m 20d Posted 27/05/11 12:12 PM Share Posted 27/05/11 12:12 PM 70.5mm Link to comment Share on other sites More sharing options...
discostig Manual mode ________________________ All day, erryday Donating Members 13,798 Member For: 16y 4m 24d Gender: Male Location: Probably above atmospheric pressure Posted 09/11/16 06:24 PM Share Posted 09/11/16 06:24 PM (edited) Just in case anyone else reads this, it's 70.1 on B series Falcons not 70.5. Are FGs different? Or is there enough wiggle room in 0.4mm that it doesn't matter? Edited 09/11/16 06:27 PM by -Stever- Link to comment Share on other sites More sharing options...
PTR_NITRO_FG Donating Members 3,214 Member For: 10y 10m 23d Gender: Male Location: NOR Perth Posted 10/11/16 03:39 AM Share Posted 10/11/16 03:39 AM FG is definitely 70.5 Link to comment Share on other sites More sharing options...
discostig Manual mode ________________________ All day, erryday Donating Members 13,798 Member For: 16y 4m 24d Gender: Male Location: Probably above atmospheric pressure Posted 10/11/16 04:22 AM Share Posted 10/11/16 04:22 AM Finding conflicting reports over on AFF about all Falcons in fact being 70.5 as well...but plenty of people saying 70.1mm too. Very confusion! I guess you can use either? If 70.1 ID rings fit I'd prefer to use that since it's less room for them to move. Has anyone tried to use 70.1 and had them not fit over the hub would be a good question. Link to comment Share on other sites More sharing options...
PTR_NITRO_FG Donating Members 3,214 Member For: 10y 10m 23d Gender: Male Location: NOR Perth Posted 10/11/16 04:55 AM Share Posted 10/11/16 04:55 AM Ask the falcon whisperer... Link to comment Share on other sites More sharing options...
arronm Dropping a turd Gold Donating Members 9,520 Member For: 16y 5m 21d Gender: Male Location: Perth Posted 10/11/16 06:35 AM Share Posted 10/11/16 06:35 AM I have plenty of fords and wheels. Will check over the weekend Link to comment Share on other sites More sharing options...
bamk2f6tornado Bronze Donating Members 777 Member For: 10y 4m 14d Gender: Male Location: Rockhampton Qld Posted 10/11/16 06:53 AM Share Posted 10/11/16 06:53 AM These are the exact ones I have on my BA. They Fit Perfect 1 Link to comment Share on other sites More sharing options...
arronm Dropping a turd Gold Donating Members 9,520 Member For: 16y 5m 21d Gender: Male Location: Perth Posted 10/11/16 09:00 AM Share Posted 10/11/16 09:00 AM .4mm ID is .2mm at the circumference. Surface corrosion is about that thick Link to comment Share on other sites More sharing options...
camo86T Silver Donating Members 1,810 Member For: 10y 2m 5d Gender: Male Location: SW Sydney Posted 11/11/16 03:15 AM Share Posted 11/11/16 03:15 AM 18 hours ago, arronm said: .4mm ID is .2mm radius. Surface corrosion is about that thick FTFY Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now