Jump to content

Why Wont My Ba Start After Dual Zone Upgrade


Guest Scott Greco

Recommended Posts

Guest Scott Greco
  • Guests

I fitted duel zone to my ba xr6 turbo to day every thing works but secrity error come up on the icc screen I have tryed every thing to to get it to start over when I checked the pcm for codes it comes up with p1260 theft detected engine disable

and I also checked codes for the cluster and it has a b1342 ecu defect what the hell is the go hear I tryed to program my keys but itg still wont start

hear is the list of parts I fitted if it helps

* green BEM

* duel zone icc unit

* hi series cluster fpv if it maters

* LH mirror with air temp sensor

* lhf door harness

* sun load sensor

* HIM programed to duelzone

* auto lights cobination switch

* I did not replace the dash harness because it has the same part number as a ba mk11 with duel zone fitted

can some one plz help me with this

Link to comment
Share on other sites

  • flame magnet
  • Gold Donating Members
  • Member For: 15y 10m 12d
  • Gender: Male
  • Location: adelaide hills- 'race air' central

it may be the icc unit and the computer/ bem dont match.

if you remove the icc, the car wont start till the big white plug on the back is connected back in.

the icc is actually part of the security. if the car and icc are not compatible security code wise, that's prol the problem.

perhaps the bem/ computer needs to be from the same car the icc came from? someone verify?

Edited by fordriver1
Link to comment
Share on other sites

  • Sucker
  • Moderating Team
  • Member For: 19y 11m 3d
  • Gender: Male
  • Location: Brisbane

:w00t2:

Although someone did mention on here a while back that it could be done...but offered no elaboration. But yeah basically the bem and icc need to learn to like each other otherwise it thinks you're up to no good and won't let you start the car. :spit:

Link to comment
Share on other sites

Guest Scott Greco
  • Guests

the bem and icc come out of the same car but still no good I tryed putting my old icc unit and bem in and it still wont start so im lost and confused

Link to comment
Share on other sites

  • Banned
  • Member For: 14y 8m 11d
  • Gender: Male
  • Location: Aspendale, Vic.

try keep car off, get to security code screen on icc (press volume button if u have to) then hold down FM and MENU for 5 seconds.

See if that trick helps you in any way

Link to comment
Share on other sites

Guest Scott Greco
  • Guests

cheers I will try that lucky the car is not on the road at the moment I want to keep if away from a ford work shop if I can it not quite std any more and a bit hard to get it there

Link to comment
Share on other sites

Guest Scott Greco
  • Guests

oh well looks like I will have to ring c if they will come round to the work shop with the ids and get this thing cranking cheers for your help guys

Link to comment
Share on other sites

  • I see a red door and I want to paint it black
  • Donating Members
  • Member For: 14y 5m 3d
  • Gender: Male
  • Location: Far north queensland

cheers I will try that lucky the car is not on the road at the moment I want to keep if away from a ford work shop if I can it not quite std any more and a bit hard to get it there

Not quite standard - that turbo could swallow my turbo whole :fishin:

Any luck yet?

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'