Jump to content

Retune Result - 379Rwkw


whistler6

Recommended Posts

  • Member
  • Member For: 16y 7m 20d
  • Gender: Male
  • Location: VIC

Hi guys,

Asked Mick to do a few things this week to my car - service the ZF, fix a rattle, make sure the tune was good, as I just replaced the rear muffler with another one of Chris' (rapid) 3.5'' in/out mufflers & 4'' stainless tip.

He completed all this plus he found a boost leak in the boost sensor hose which he replaced and also did the fuel filter too!

Cannot say how happy I am with the way it drives now, heaps better seat of the pants feel, more crisp throttle.

And... its pumping out 379rwkw on 16psi! It did 383rwkw on 16.5psi but Mick put it back to 16 where I wanted it, which was the original tune a few months back....

Can't recommend Mick and the team at Pit Lane enough, great job!!!

James

(I'll post the dyno sheet when I get scanner back tonight)

Link to comment
Share on other sites

  • Donating Members
  • Member For: 16y 9m 13d
  • Gender: Male
  • Location: Melb. Northern suburbs

Great result James, 30rwkw gain with a rear muffler change, fixing a boost leak,and a tweak of the tune. :blink:

Any pics. of the 4" tip? :spit:

Link to comment
Share on other sites

  • Member
  • Member For: 16y 7m 20d
  • Gender: Male
  • Location: VIC

Mods -

Rapids V3 kit plus 4'' intake/battery in airbox

Rapids exhaust - 4'' dump/4.5'' cat/3.5'' system

Process West surge tank & pump

Turbo port/12psi actuator

Seimens 60's

Here's a few pics, scanner is at the mrs so took a pic of the chart....

1.jpg

1.jpg

1.jpg

Link to comment
Share on other sites

  • Three pedals are better then two..
  • Donating Members
  • Member For: 16y 10m 23d
  • Gender: Male
  • Location: Melbourne

I think that tip looks good, doesn't really look ricer as all.

And congrats on the power mate.

Link to comment
Share on other sites

  • The Cleaning Dudes Ute
  • Silver Donating Members
  • Member For: 18y 6d
  • Gender: Male
  • Location: Bentleigh, Vic, Australia

Sweet result James

How do you find the zf now after the flush?

Good work Mick :innocent:

Link to comment
Share on other sites

  • Member
  • Member For: 16y 7m 20d
  • Gender: Male
  • Location: VIC

dyno2006.jpg

dyno2008.jpg

Originally I was going to get a full flush, but Mick said it was real clean so just changed filter and few litres of fluid that comes out with the pan off I think.

Probably didn't need to be done but I like knowing that its been done!

Thanks Scott, I shall see u on the hwy, will look pretty good, 2 nice looking ego T's with power to match!

Haven't had a drama with the auto since I got the work done.... How's urs travelling Jarrod?

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'