Brandonn Donating Members 2,304 Member For: 15y 6m 14d Gender: Male Location: port hedland Posted 02/07/09 11:42 AM Share Posted 02/07/09 11:42 AM well every 1 seems to b putting up thier builds to big power so I figured id start mine now while I start rather then try remember after its all donecar has a built engine and is putting out about 375rwkw nowsh*t intercooler and exhaust r holing it backso the changes that are being made at the moment areACE stage 3+ clutch kitThis kit includes :11" Billett Steel FlywheelHigh Performance Diaphragm Pressure Plate with Billett Steel BaseSprung Organic Friction PlateAlloy Concentric Slave CylinderBraided Clutch High Pressure Feed LineBraided Clutch Low Pressure Bleed LineShort Shifter Kitas the old button clutch decided to sh*t itself after under 2000k'sand am told mal uses this clutch and there is another car getting round with 529rwkw useing this clutchRAPIDS V4.5 is also going onto the car to piss off the useless intercooler setup that is currently on itand for the exhaust CES is building me a 4" system including dump pipe and twin xpipe catalitic convertorsalready has 60lb injectors, better valve springs, surge tank 044 pump n all that normal upgradesso with these new mods we r hopeing for mid 400'sthen looking to strap a bigger turbo on in october and take it to the magic 500ill keep updates comeing as I get them =-D Link to comment Share on other sites More sharing options...
turbo.vixen Hey guys, Tab is here... Oh i feel sick Lifetime Members 8,459 Member For: 15y 10m 6d Gender: Male Location: sunshine coast Posted 02/07/09 11:44 AM Share Posted 02/07/09 11:44 AM lol Link to comment Share on other sites More sharing options...
senna_T Forged Member Lifetime Members 15,818 Member For: 17y 1m 22d Gender: Male Location: SW Sydney Posted 02/07/09 11:47 AM Share Posted 02/07/09 11:47 AM ahahaha, love TV's post!Good luck Brandonn, what turbo upgrade are you looking at mate? What parts were used to build the motor? Link to comment Share on other sites More sharing options...
ETM Member 1,194 Member For: 17y 16d Gender: Male Location: syd south Posted 02/07/09 11:49 AM Share Posted 02/07/09 11:49 AM you wont get mid 400's with a stock turbo unfortunately. Link to comment Share on other sites More sharing options...
GR8XR6 ANGEL EYES Silver Donating Members 1,683 Member For: 15y 8m 7d Gender: Male Location: SE Suburbs, Melbourne Posted 02/07/09 11:50 AM Share Posted 02/07/09 11:50 AM (edited) Ooops wrong thread? Edited 02/07/09 12:01 PM by GR8XR6 Link to comment Share on other sites More sharing options...
Brandonn Donating Members 2,304 Member For: 15y 6m 14d Gender: Male Location: port hedland Posted 02/07/09 11:56 AM Author Share Posted 02/07/09 11:56 AM what was your post d bag -.-we havnt got that far yet at the moment just getting these bits n pieces into it then the bloke who is doing the work for me is gonna ring round c what kinda turbo would b not to laggy for low 500's I don want sum rediculously big 1 just sumthing to handle itits wilbaz old car can remember wat went into but I was told it was good gear all the paper work for it is back in qld to so ill ask the guy with my car n get back to ya :D Link to comment Share on other sites More sharing options...
Brandonn Donating Members 2,304 Member For: 15y 6m 14d Gender: Male Location: port hedland Posted 02/07/09 12:00 PM Author Share Posted 02/07/09 12:00 PM you wont get mid 400's with a stock turbo unfortunately.seen a few ppl round with 430's Link to comment Share on other sites More sharing options...
bcl Toughest BA Turbo Lifetime Members 3,408 Member For: 21y 3m 4d Gender: Male Location: Sydney Posted 02/07/09 12:06 PM Share Posted 02/07/09 12:06 PM Maybe pushing it with race fuel; but I'd rather see any claim backed with a good 130+ mph at the track.Brian Link to comment Share on other sites More sharing options...
Brandonn Donating Members 2,304 Member For: 15y 6m 14d Gender: Male Location: port hedland Posted 02/07/09 12:10 PM Author Share Posted 02/07/09 12:10 PM ill b giveing the track a go but im not pro down the quarter so I wont b expecting alot and it is a manual although MPH should stll b alright I guess Link to comment Share on other sites More sharing options...
bcl Toughest BA Turbo Lifetime Members 3,408 Member For: 21y 3m 4d Gender: Male Location: Sydney Posted 02/07/09 09:30 PM Share Posted 02/07/09 09:30 PM True, even with a soft launch and slow time you can still do a good MPH. For example, I did a slow 2.2 60', low 91mph at 1/2 track, but still managed 138mph (which I think is still the fastest mph of any manual xr6 turbo).Brian Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now