senna_T Forged Member Lifetime Members 15,818 Member For: 17y 2m 12d Gender: Male Location: SW Sydney Posted 21/01/09 03:08 AM Share Posted 21/01/09 03:08 AM (edited) OK Guys, After a decent amount of interest i have been able to organize a Group Buy on Hurricane Stainless Steel 4.5" bodied cats. [color="#FF0000"][b]I must have 10 participants to make this work[/b][/color] The cats have 3" ends on them that can be adapted to any exhaust (standard or aftermarket). Shipping is available at a Flat rate of $45 Nationwide. The shipping is slightly higher because it is not something that i have alot of time for and i am doing all the running around. If you wish to organise your own shipping you may, alternatively if you are local to sydney you may pick it up from me. The List: 1) Senna 2) MRDOSE 3) PSIFRK 4) Ghosti 5) kona 6) John K - Pick up [color="#00FF00"]PAID AND COLLECTED[/color] 7) iTec - Pick Up 8) xr0500 [color="#00FF00"]PAID[/color] 9) ymmit [color="#00FF00"]PAID[/color] 10) bionic_turbo [color="#00FF00"]PAID[/color] [s]11) NVT [/s] 12) Davecdp [color="#00FF00"]PAID[/color] 13)F6RD This buy will run until the end of Feburary, so please get in while you can. Once we have 10 people i will be oprganising the shipping for each individual cat, so no-one will have to wait for anyone else to pay. Pics as below: Edited 30/01/09 10:09 PM by senna_T List updated Link to comment Share on other sites More sharing options...
Guest Guests Posted 21/01/09 03:23 AM Share Posted 21/01/09 03:23 AM Good price there mate Any tech info on them?? Link to comment Share on other sites More sharing options...
senna_T Forged Member Lifetime Members 15,818 Member For: 17y 2m 12d Gender: Male Location: SW Sydney Posted 21/01/09 03:31 AM Author Share Posted 21/01/09 03:31 AM Good question mate, i know there are a few pushing over 350rwkw, so i'm pretty confident that they will flow upto 400rwkw when matched to the right setup. They are full stainless, core (or biscuit) included. So it is tough and the sheer size should support good flow. Link to comment Share on other sites More sharing options...
Guest Guests Posted 21/01/09 03:37 AM Share Posted 21/01/09 03:37 AM Was just thinking that maybe the 3" inlet/outlet may affect top end power Do they have a 4" in/out option? What cat are you currently running?? Link to comment Share on other sites More sharing options...
senna_T Forged Member Lifetime Members 15,818 Member For: 17y 2m 12d Gender: Male Location: SW Sydney Posted 21/01/09 03:41 AM Author Share Posted 21/01/09 03:41 AM The ends can be cut down as the cone is quite long, so technically it can be up to a 4" inlet/outlet. My car currently runs a wounded cat... Link to comment Share on other sites More sharing options...
Guest Guests Posted 21/01/09 03:48 AM Share Posted 21/01/09 03:48 AM Haha wounded as in hollow i'm guessing Yea i've actually seen that done on another brand of cat but the core wasn't held in by anything except the decreasing diameter of the inlet/outlet so it just fell out. These should easily do 350rwkw with the stock system coupled with an after market dump as is though Link to comment Share on other sites More sharing options...
senna_T Forged Member Lifetime Members 15,818 Member For: 17y 2m 12d Gender: Male Location: SW Sydney Posted 21/01/09 03:52 AM Author Share Posted 21/01/09 03:52 AM Yeah, these are held in by the outer casing, however i'm told that the widest part is pulled in around the biscuit, so even if you cut the cone all the up to say 4.25" it will stay in place. Link to comment Share on other sites More sharing options...
MRDOSE Member 1,195 Member For: 16y 3m 21d Gender: Male Location: Sydney Posted 21/01/09 03:57 AM Share Posted 21/01/09 03:57 AM pretty keen on this one mate, if i can source up the rest of the zorst il be in for sure Link to comment Share on other sites More sharing options...
senna_T Forged Member Lifetime Members 15,818 Member For: 17y 2m 12d Gender: Male Location: SW Sydney Posted 21/01/09 04:03 AM Author Share Posted 21/01/09 04:03 AM I can put you in contact with someone to do the rest of the exhaust too mate, so let me know if you have no other luck Link to comment Share on other sites More sharing options...
Ghosti NOT THERE!... THERE! Member 852 Member For: 15y 11m 27d Gender: Male Location: Melbourne Posted 21/01/09 12:07 PM Share Posted 21/01/09 12:07 PM (edited) Yeah man, count me in. Have to wait until mid-Feb to pay though if that's cool. Probably buying a house soon, so I'll have to slip this one past the [i]Minister for Finance & Fun[/i] if possible hehe. Edited 21/01/09 12:08 PM by Ghosti Link to comment Share on other sites More sharing options...
Recommended Posts