PHANTMXR6 It's not a MKI! Member 1,742 Member For: 15y 9m 9d Gender: Male Location: Earth Posted 07/01/09 05:19 AM Author Share Posted 07/01/09 05:19 AM Hey guys, just letting everyone know that the Speco brand, Part#547-53 oil filter adaptor is compatible with the FG T engine oil filter.Mods, you can close this thread now. Thanks. 1 Link to comment Share on other sites More sharing options...
senna_T Forged Member Lifetime Members 15,818 Member For: 17y 1m 21d Gender: Male Location: SW Sydney Posted 07/01/09 05:40 AM Share Posted 07/01/09 05:40 AM I've pinned the topic as a sticky, but we'll leave it open as there will no doubt be questions and rather than start a new thread, people can ask them here Link to comment Share on other sites More sharing options...
XCH45R New Member 19 Member For: 14y 7m 21d Gender: Male Location: Shellharbour Posted 11/04/10 10:04 AM Share Posted 11/04/10 10:04 AM What is this said oil filter adaptor used for? Got me confused I ripped my filter of my ba and it had AFL101 on it, which I presume is the same as a Z9 as that's what I put on it and it aint leakin .. lol Why is the BA different to the BF? Link to comment Share on other sites More sharing options...
SuckSqueezeBangBlow ʎǝʞuoɯ ɹoıuǝs Donating Members 1,808 Member For: 15y 3m 12d Gender: Male Posted 11/04/10 10:25 AM Share Posted 11/04/10 10:25 AM BF uses Z516 filter.I bought one of these adaptors just last week. they are used for adding things like oil temperature and pressure senders. its basically a plate that fits between your block and your oil filter. Link to comment Share on other sites More sharing options...
Rudiger All round good guy! Lifetime Members 1,122 Member For: 15y 10m 19d Gender: Male Location: Greenvale, Victoria Posted 11/04/10 01:45 PM Share Posted 11/04/10 01:45 PM JC807, where did you buy it from and roughly how much??Cheers. Link to comment Share on other sites More sharing options...
XCH45R New Member 19 Member For: 14y 7m 21d Gender: Male Location: Shellharbour Posted 11/04/10 08:36 PM Share Posted 11/04/10 08:36 PM BF uses Z516 filter.I bought one of these adaptors just last week. they are used for adding things like oil temperature and pressure senders. its basically a plate that fits between your block and your oil filter.Aaaah... Got ya.Thanks :D Link to comment Share on other sites More sharing options...
SuckSqueezeBangBlow ʎǝʞuoɯ ɹoıuǝs Donating Members 1,808 Member For: 15y 3m 12d Gender: Male Posted 11/04/10 09:38 PM Share Posted 11/04/10 09:38 PM (edited) ordered it from AutoOne, around $50. seems easier than t-piece off the turbo oil feed/sender off the block. Edited 11/04/10 09:39 PM by JC807 Link to comment Share on other sites More sharing options...
snoopin99 Member 33 Member For: 13y 10m 18d Gender: Male Location: Narre Warren, VIC Posted 17/10/10 12:30 PM Share Posted 17/10/10 12:30 PM I fitted one of these and the damn thing leaks from the grub screws that block off the unused ports, anyone else have this trouble? guessing I will have to take it off at the next oil change and loctite the grub screws or sumthin to stop the leak! Link to comment Share on other sites More sharing options...
SuckSqueezeBangBlow ʎǝʞuoɯ ɹoıuǝs Donating Members 1,808 Member For: 15y 3m 12d Gender: Male Posted 17/10/10 09:48 PM Share Posted 17/10/10 09:48 PM use thread tape Link to comment Share on other sites More sharing options...
Slowxr6t Member 512 Member For: 5y 3m 24d Location: New zealand Posted 07/11/19 11:52 PM Share Posted 07/11/19 11:52 PM @JETURBO HI JETURBO, I bought a grex thermostatic sandwich block to rig up an oil cooler and mount the ryco oil filter, problem is the fg xr6t id of the filter housing is 59mm and the id of the o-ring on the sandwich block is 57mm so it will overhang 1mm each side inside the engine filter housing if it is perfectly aligned, I think it's too risky!! Do you know of any other sandwich blocks that fit properly? Maybe mocal? Thanks Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now