JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 15y 10m 18d Gender: Male Location: Adelaide Posted 08/11/19 12:02 AM Share Posted 08/11/19 12:02 AM Sorry for the Potato photo but buy this and thank me later Link to comment Share on other sites More sharing options...
Slowxr6t Member 515 Member For: 5y 4m 15d Location: New zealand Posted 08/11/19 12:57 AM Share Posted 08/11/19 12:57 AM So @JETURBO does speco make a thermostatic sandwich block that can run hoses to a oil cooler, preferably 12mm id hoses or equivalent, and does it have a port to run a oil temp guage. These fg Falcons have some oddball size bits on them, its hard to find accessories to fit, greddy and mocal sandwich blocks seals dont fit. Link to comment Share on other sites More sharing options...
JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 15y 10m 18d Gender: Male Location: Adelaide Posted 08/11/19 01:20 AM Share Posted 08/11/19 01:20 AM Unsure if they make it all in one but this sandwich plate has the correct sizing for Z516 - AFL 101 oil filters for late BF-FGX to run outlet size to suit temp and pressure sensors for gauges finding a Sandwich block with -12 outlet fittings I have not seen ever iirc Link to comment Share on other sites More sharing options...
arronm Dropping a turd Gold Donating Members 9,520 Member For: 16y 5m 23d Gender: Male Location: Perth Posted 08/11/19 01:36 AM Share Posted 08/11/19 01:36 AM You need derale product. It has thermostat and the adapters you need. I will find the part No and post Link to comment Share on other sites More sharing options...
arronm Dropping a turd Gold Donating Members 9,520 Member For: 16y 5m 23d Gender: Male Location: Perth Posted 08/11/19 01:49 AM Share Posted 08/11/19 01:49 AM Part 15782. This is what I have on BA F6. But doesnt have temp port. I have aeroflow one on BF F6. Has temp port but no thermostat. Part No https://www.ebay.com.au/itm/Aeroflow-Sandwich-Plate-Universal-LS1-308-304-XR6-Turbo-Ski-Boat-Drag-Race-Car-/400525227572 The way to do both is use the aeroflow plate and this https://www.amazon.com/Derale-25719-Fluid-Control-Thermostat/dp/B004XOQ0R6 Link to comment Share on other sites More sharing options...
JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 15y 10m 18d Gender: Male Location: Adelaide Posted 08/11/19 04:31 AM Share Posted 08/11/19 04:31 AM But they’re not 12mm Arron .... ? He’s asking about 12mm gear Link to comment Share on other sites More sharing options...
arronm Dropping a turd Gold Donating Members 9,520 Member For: 16y 5m 23d Gender: Male Location: Perth Posted 08/11/19 06:49 AM Share Posted 08/11/19 06:49 AM (edited) I think everyone is confusing thread size with hose size. I use 400 series push on (-10) for oil cooler internal hose size is 5/8 or 16mm. The 3/8 is just the thread size into the fitting. You buy an adapter to go from 3/8 NPT to -10 AN. If you only want 12mm ID use -8 gear. use this in the sandwich plate https://speedflow.com.au/an-flare-to-npt-90-degree-adapters-from/ Edited 08/11/19 06:51 AM by arronm Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now