Jump to content

Blkphn Makes 500rwhp (375kw)


BLKPHN

Recommended Posts

  • Member
  • Member For: 16y 6m 10d
  • Gender: Male
  • Location: Eltham Melbourne

Well first things is First I have say a massive,

Thankyou to Chris and Theo and BLUEPOWER racing developments one for

the entertainment I had while my car was there and then also the

outstanding work that was done to my car.

After some drama's and some poor results from previous tune's with I decided

to take my car to Bluepower to get the tune Fixed once and for ALL !! My

car was sat on the dyno and we checked through a few things changed the

thermostat and tuning then began... each change that was made to the tune

chris explained to me what was going on how it would improve the car in

each area make it more driveable and making it a truly custom tune specificly

for my car not just a generic tune tweaked to suit.

Results, well not evan with the tune not nearly finished power was well

above my previous record. After much massaging of the tune chris produced

a few runs of above 500hp which totaly blew me away I was so extatic and

consistant runs as well which goes to show that the gear that is on the car

can perform very well time and time again..

The power reading was made with less boost than it had making 330rwkw on

the previous tune. My problem now is chirs has found a few area's in which

we can improve the results and I can't wait to get it back there with the

improvements in place..

So after driving it for a day im blown away at how well it drive's and I can put

my foot down and get the car going without having nothing and then bang

just frying tyre's, which of course it can too but it is much more drivable mid

range power is up immensly and its feels so much more responsive...

So at this stage my can is running standard engine, standard clutch,

standard diff, a plazmaman 800hp kit, process west surge tank, 60lb injectors, xforce exhaust.

I just want to say a huge thanks again to Chris and Theo you guys have

done an outstanding job I couldn't recomend you and higher..

Cheers Tristan

Dyno sheet...

IMG_6098.jpg

just cause.....

BLKGLLYRD.jpg

Link to comment
Share on other sites

  • You are a dead set goose
  • Silver Donating Members
  • Member For: 18y 4m 19d
  • Gender: Male
  • Location: Melbourne

Top stuff Tristan. Glad you got the results you were looking for mate :bowdown:

Another local Melbourne tyre frying F6 to add to the list!

Link to comment
Share on other sites

  • Donating Members
  • Member For: 16y 8m
  • Gender: Male
  • Location: Broady, Melbourne

Nice work all round. 375 rwkw is a great target. It was my target but alas, at 18psi I'm not making what I should be...time for some investigation me thinks. After I blow over $2800 on my trans and converter that is...

But hey this is about you, not me. Enough about me. So, what do YOU think about me?

Link to comment
Share on other sites

  • Member
  • Member For: 16y 6m 10d
  • Gender: Male
  • Location: Eltham Melbourne
Nice work all round. 375 rwkw is a great target. It was my target but alas, at 18psi I'm not making what I should be...time for some investigation me thinks. After I blow over $2800 on my trans and converter that is...

But hey this is about you, not me. Enough about me. So, what do YOU think about me?

I think you crazy !! haha and I think you need a retune... :banghead:

Im only running 14psi to make the figure...

Link to comment
Share on other sites

  • Donating Members
  • Member For: 19y 7m 19d
  • Gender: Male
Cheers mate,

I saw you there other night out on springvale rd.... youve got one tuyff looking car mate..

Oh did you? I didnt see you.

cant belive I got spotted as im in the middle of making a few body mod changes and its not finished yet

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'