Jump to content

Turbo Oil Supply Screen Cleaning


Ralph Wiggum

Recommended Posts

  • New Member
  • Member For: 5y 19d

There is a very small filter in the block end  banjo fitting that will need to be removed and you need a small pair of opening cir clip plyers the new kit bolts back on without the small filter the filter is in the bolt not the  banjo 

 

The new filter in the kit restricts the flow enough

Link to comment
Share on other sites

  • Member
  • Member For: 15y 5m 14d

Yes, I have already removed the OEM filter which is 30mm long on an FG and also removed the OEM metal supply line and installed an Earls's filter supply line but I was not aware of this restrictor that has been mentioned. 

 

I never found one when I removed / installed the lines and fittings so I was asking where this restrictor is supposed to be located  🤔

 

I have seen oil line kits that have a small orifice opening on the 90 deg turbo end fitting but the Earl's kit that I have did not have it.

Edited by O Trader
Link to comment
Share on other sites

  • 9 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'