Search the Community
Showing results for tags 'xr6'.
-
Hey all, im half way through the conversion I think. I’ve got the box and motor In the car taken out the old body loom, need to go pick the new one up tomorrow. But that’s all I need to get the car running right? At the moment I have: -engine/zf6 -engine/box loom (body loom picking up tomorrow) -same ecu that matches the tcm -tailshaft Some people are saying that I need to get the key reprogrammed, need to change the pedal box aswell plus floor plate. Am I able to get some expertise advice on how to crack on with this. It’s only been about 30 hrs since I’ve started and need to get it done asap… Thanks to all
-
Does anyone know if these are purchasable anywhere or if anyone still makes them and/or anyone here wishing to sell theirs? would love a pair on my falcon. considering custom making them myself since I cant find them anywhere.
-
G’day I have a exhaust manifold gasket that’s leaking obviously on My BA XR6 Turbo and I was wondering whether I could unbolt the 12 manifold bolts and slightly pull the manifold away and remove the gasket and then slide the new one back in and bolt the manifold back up without having to remove the whole thing with the turbo? an answer would be mint, cheers
-
So this afternoon I put My Ba Xr6 turbo 5spd into second gear and gave it a boot till around 3,500rpm and could hear a super load ticking noise coming from the engine bay, replicated the same sound, only in second and as soon as boost starts kicking in. thoughts?
-
G’day does anyone happen to know what size the drain and fill plugs on a Tremac T5 are? I read that they are a 3/8 drive but upon looking they look like an allen head not a square?
-
G’day, Today I went over a stupid unsigned pipe in the middle of the road and buckled my clean deep dish 20’s that I run on My Ba XR6 Turbo, so when I got home I decided to test fit some 17x8 G6E rims that I had lying about thinking I could run them whilst my 20’s get repaired. when putting the 17”s on the rear of the car and checking for any issues, I noticed a bolt that’s to do with the rear suspension/ lower control arm (if they have them at the rear lol) that sits about 2mm away from the inside of the rim due to their offset. Is this an issue if I go over bumps or will the bolt/rim be one unit and not touch while going over bumps etc? I would upload the pics but don’t know how to turn a pic into a url lol 🤓
-
My car broke down after turning it off, the reds come on but there's no kick. Can someone please help me as I'm told it may be the bcm but I'm not sure. I've had the key and ignition replaced and paired by Ford to no avail. This is my pride and joy and I really want to get her fixed, as ppl say they've had some similar problems and the cars never ran again
-
I was wondering if it was possible and what can I do to turn a b series xr6t into a n/a other than the obvious?
-
Looking to get a catback system that sounds good but isn't too loud, any suggestions? Preferably fit within the 90 decibel limit. Thanks in advance -
Gday, bought a FG XR6 N/A a little while ago, was going to buy a cat back exhaust and wondering on everyone's thought on the best sounding for the N/A. I heard that a 3" doesn't sound good and 2" isn't loud enough soo I was going to go a 2.5" but thought id ask for opinions Thanks.
-
I've got the dreaded spoiler bolt hole rust and have the chance at a clean Fairmont lid and need to know if its a direct fit to the XR6 sedans? I'm not sure if the taillight sizes are different and cause it to not match up or something along those lines. I've already got ghia leather interior with chrome door handles so the chrome boot garnish will feel at home 😆 Cheers legends
-
Hi guys, I'm a newbie to Performance Upgrades, so I thought I'd get some ideas from some of you experienced performance junkies. I have recently bought a BA XR6 that has already had Stage 3 cams fitted, oversized injectors, extractors, an X-Force exhaust and lowered about an inch and a half. It was performance tuned by a reputable company and dyno'd at just under 300hp. So it's no slouch. It needs some repairs done, rear struts/shocks, diff, one of the front bearings sounds like it's on its way out and some fibreglass needs some loving on front and rear bumpers. And an idling problem (surging revs and stalling on occasions) which I will hopefully have sorted over the next week. What I want to know is, aside from the obvious turbo upgrade, what else can I do to it to give it that extra VROOOM I love?? Any suggestions would be greatly appreciated 👍
-
Hi all, might possibly be in wrong topic. I was wondering if some one could possibly tell me the difference in a barra between a non xr, xr6, and a xr6t, apart from the obvious turbo lol. Cheers
-
Hi there, I have a 2006 BF XR6 Falcon. All of a sudden my cluster and park lights stopped working.. My indicators, low/high beam and break lights work fine, pulled all fuses and checked them and all was good? Also I seen some other forums about this issue and seen that the combination switch are a common issue, so I checked that and didnt see any stripped/cut wires on the sharp turn of the green clip that pushes into the socket above the ignition and down the rest of the wires? Quite stumped tbh...Does anyone know what or if theres a fuse for the parking lights? Found the cluster fuse too but that was fine. Cheers & thanks Levi
-
I have a 2007 XR6 BF MK2 Ford Falcon and I want to change the colour of the dash from blue to green, same with the headunit. Is either possible and if so are there any tutorials, tips or where to get the LED's to do so. Thanks.
-
Hey guys just wondering if anyone knows where I'd get a set of black sun visors and map reading lights for my fg sedan or knows the best way to do it myself, can't find them anywhere. Thanks
-
Hey guys looking for some advice. I converted my BA to a 6 speed manual and am about to wire up a reverse lockout solenoid Control box that actives under 8 kmh. The control box requires input from the vehicle speed sensor VSS. Some cars have this on the gearbox. But with the falcon the speed reads off the wheel bearings and into the abs? Can I tap into the two wire speed sensor from the back of the wheel for my VSS? Will abs affect any of this? Cheers http://www.grcperformance.com/Instructions/Reverse Lockout.pdf Attached is the instructions. Last page has the wiring diagram
-
It’s not turbo. Not looking for a faster option just what will make the car sound better
-
Hi guy first time car owner was just after suggestions on mods I can add to my 2014 fg falcon xr6. Now bare with me as I’m slowly but surely get a lil car savy lol but any advice would be great PS I see in other forums something called a CAT so anything like that if u could put it in lamen terms that would be great cheers in advance
-
Hey guys does anyone have any idea how to pop the hood on a 2006 bf xr6 the hood release cable has snapped completely clean the cable including the little ball on the end of the cable have ripped out I've tried everything thanks
-
Hey guys & gals, I’ve had this 08’ FG XR6 for about 10 months .. no probs with the stereo until recently, started cutting out on bass notes, be it from the CD, radio music & even station ads , been doing it for about a week and now finally died .. note I don’t crank the volume high, & it has a sub box in the boot which still works when the head unit cuts out.. any ideas people?
-
Hi all, I'm new here and could really use some help. I have a 2008 FG XR6 Turbo with 240000km on it. It has the ZF six speed. For a while now it has been running a bit weird. I will be driving, mostly when it's cold or warm and it will make a weird kinda vibration noise, revs will drop by approx. 400-500rpm for the duration of the vibration. It will do this up to 7 times. It is intermittent and each vibration lasts for approx 0.5-1 second each time. I have googled it and even bought a Bosch OBDII reader and it came up briefly with trouble code P0133 . I have replaced the o2 sensor and it fixed the issue for a day. I found that the hose that runs from the PCV valve was snapped, so I replaced it with some fuel line hose and it fixed the issue for 2 days before starting. All the manifold bolts are tight and I even checked it for leaks and found nothing. It doesn't do it while on boost, only while on vacuum. Turbo has minimal play for a car of it's age. It is starting to do my head in. Any help would be greatly appreciated. Cheers
-
Hey fellas, Diff in my BF XR6 Ute had started doing some whine and I am planning on swapping it. Just need some advice. It has the 3:45 LSD with the one piece tailshaft. I purchased another complete diff *wheel to wheel* from the BF XR6 Turbo ute which is the 3:46 LSD and it had the 2 piece tailshaft. Now, the yoke is different obviously and caliper, rotor size etc. Will it fit if I just carry over the yoke from my diff onto the 3:46? Cheers
-
Hey I Brought A Futura With A XR6 Turbo Motor Converted Into It. Drives Fine But It When It Goes Into Boost It Feels Like It Starts Going Into Boost Then Stops And Shudders Like Traction Controls Is On Or Something And Don't Feel Like Boost Is Even On Any Ideas On What's Happening And There Are A Few Vacuum Lines I Don't Know Where They Go Will Add Pics
-
Hi everyone, I’m new to this forum, lifetime ford owner, paraplegic hoon and just recently Xr6 turbo owner! I’ve just bought a 2004 Xr6 turbo with 190,000 km’s on the clock, it’s been well maintained and feels and sounds healthy. There are things I replace on any car I buy like air filter, plugs, coil pack etc but I want to know what everyone on this forum recommends I do to the car. I did see on another forum they said something about using genuine coil packs and lubing the Wastegate?? Any help would be much apreciated??
