Jump to content

Search the Community

Showing results for tags 'superpro'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Content Type


Forums

  • General Vehicle Forums
    • XR6 Turbo
    • FPV PERFORMANCE INC.
    • GT335 & GS315
    • G6E Turbo
    • UTEopia
    • Territory Turbo
    • Focus XR5 Turbo
    • Mondeo XR5 Turbo
    • Ford Discussion
    • Ford 4.0L N/A Discussion
    • Conversions, transplants and Frankensteins
  • General Forums
    • General Car Talk
    • Off-Topic
    • Multimedia
    • MotorSport
    • Drag and Circuit Racing
    • Photo Gallery
  • Vehicle Technical Forums
    • General Tech
    • Audio/Visual Workshop
    • Interior & Exterior Workshop
    • Exhaust Workshop
    • Electrics Workshop
    • Wheels and Tyres
    • Suspension and Handling
    • Brakes
    • Driveline Workshop
    • Turbo Workshop
    • Intercooler Workshop
    • ECU Workshop
    • Fuel System & Induction Workshop
    • Blow Off Valve Workshop
    • Engine Workshop
    • 300+ Club
    • 400+ Club
    • 500+ Club
    • 600+ Club
    • 700+ Club
  • Auto News & Reviews
    • Ford US News
  • Advertisers Forums
    • Automotive Catalogues and Specials
    • Advertiser Q&A / Feedback Forum
  • Cruise & Event Forums
    • Scheduled Events Forum
    • General Discussion
    • Australian Capital Territory
    • New South Wales
    • Northern Territory
    • Queensland
    • South Australia
    • Tasmania
    • Victoria
    • Western Australia
    • New Zealand
  • The Market Forums
    • Classifieds
    • Small Business Directory
    • Group Buys
  • The Site
    • Site Announcements
    • Merchandise Forum
    • Suggestions, Problems or Questions

Product Groups

  • Advertisements
  • DM Packages
  • Merchandise
    • Stickers
    • Key Rings

Find results in...

Find results that contain...


Date Created

  • Start

    End


Last Updated

  • Start

    End


Filter by number of...

Joined

  • Start

    End


Group


AIM


MSN


Website URL


ICQ


Yahoo


Jabber


Skype


Location


Interests

Found 3 results

  1. Hi Everyone, Just bought a very tidy 2008 G6e Turbo with only 90K on the clock, looking to do some mods and a tune in the near future. What I am after is advice on a couple specific things. Where to get Diff Bushes replaced in Sydney? I've called around and there is a huge variance in price, from $500 to $2000. How much should I expect it to cost? Which aftermarket bushes are the way to go? I'm leaning towards Superpro, Kit210K Who are the top recommended tuners in the Sydney Area? Any advice is much appreciated. Thanks in advance.
  2. Hi everyone, I just brought my car to a local specialist for a steering and suspension check and I was advised that my front upper control arms bushes are broken ( yea I can slightly feel my steering is a bit soft). Now I’m thinking to get the Superpro upgrades kit online by myself but I’m not sure which ones I should get? The whole brand new Superpro upper control arm assembly kits ($395/pair) or just the Superpro bushes ($190/pair)? The local mechanic would charge me $350 for the labour if I bring my own brand new control arms. Otherwise it would be more than $900 if they supply me the parts (Superpro-Control Arm Lower Assembly Kit and Superpro Control Arm Upper Assembly Kit - Polyelast Bushes) + $550 labour. I prefer high quality products that can last very long. What do you guys think? Cheers.
  3. Most people take their lowered XR6 in for a wheel alignment and are informed that there's not enough room left on the camber bolts for the amount of shims required to adjust the camber back to factory specs. I was in the same boat, I've lowered the front of my FG ute using SSSL springs and then it's another 8mm lower again because I have Bilstein shocks with the spring installed on the lowest of the 3 settings. HTG measurement is around 335mm (which fills the guard perfectly). My camber was around -2.5° so I needed 1.5° of adjustment to bring it back to -1.0° Now I only had around 10mm left on the upper control arm bracket bolts. The figure for adjustment (from Superpro) is ~9mm of shims = 1° of adjustment. This means I would need around 13.5mm of shims installed to correct the camber. The bolts were not long enough obviously, any suspension shop would say "you need a camber kit". Superpro make a camber kit which is "designed to allow Camber Adjustment on Standard Height & XR Ride Height Vehicles only." The kit is around $100 and you need two kits per vehicle so that's 200 bucks. Each kit comes with 2 brackets, 3x 6mm, 2x 3mm and 4x 1.6mm shims BUT you need to put 1x each shim on EACH bracket for the kit to be the same as standard. So really you're only getting 1x 6mm, 0x 3mm and 2x 1.6mm for adjustment. How am I supposed to install 2x 13.5mm of shims per side with only 1x 6mm shim and 2x 1.6mm shims? The kit might be preferable for a suspension shop which has extra shims they can use but you've just basically forked out $200 for some brackets with longer bolts and no change to the camber (and I'm not sure just how much longer the bolts are after putting 1 of each shim back on?). I ended up going the DIY option which is installing longer bolts into the standard brackets. It's easy, costs $3-$5 for 8x M10x45mm bolts and only took an hour or so. First you need to remove the brackets from the car. I have a hoist but its easy to do on jack stands just remove the wheel, undo 2 bolts on the upper control arm then undo the 4 bolts in the engine bay and the 2 brackets will come out. Check the condition of your upper control arm bushes, mine were stuffed. Make sure you take note of previously installed shims and their positions. 1 bracket removed This is the bracket, that's a shim. Now, find a bit of heavy wall pipe that fits over the head of the bolt and put the pipe in a vice. Position the bolt head on the pipe and hit the bolt through with a hammer. The bolts are fusion welded onto the bracket but come out pretty easily. You'll need to clean up the welds so the new bolts sit flush. That's a 5mm shim on the right. Length of old bolt is 35mm Length of new bolt is 45mm (M10 bolts btw) Now you can either just place bolt through or you can weld them in to make them easier to do up in the vehicle. I welded my bolts in and a quick coat of paint. After that it's just reassembly making sure to put the shims in their original positions. I milled up some 12.5mm shims out of alluminium which you can see behind the factory shim in this pic. I still need to get a wheel alignment but this should help cut down the amount of adjustment required. Shims are pretty easy to make, if they don't need to be removed easily just use some flat bar in whatever thickness you want and drill 2 holes.. easy. Your wheel alignment place will have shims anyway. The Superpro shims are made to easily slot in without removing the bracket. That's all there is to it.. hope it helps save forking out $200
×
  • Create New...
'