Jump to content

bitcrusher

Member
  • Posts

    38
  • Joined

  • Last visited

Posts posted by bitcrusher

  1. So I have a few mods and recently installed a 15 psi turbo smart wastegate and while there I ported the waste gate hole as it had flapper mod but the hole wasnt opened up

     

    car has 1000cc injectors 3.5 inch exhaust 4 inch dump 460 walbro pump, valve springs oil pump gears.

     

    its has a base map mail order sct tune to get it moving so I can take it to dyno

     

    took it for a squirt gave it alot, it boosted to 22 psi quite hard than I realised backed of and cruised home car had a rough idle on way back sounded like it wasnt running on all cyclinders will take it for a run around block tonight see if its still same

  2. As stated thought id clean the oil filter line to turbo found a few small specs I purchssed this car earlier this year as un finished car wasnt all that well looked after the last 12 months before I got it has shown.

     

    Any wa back to the point im gonna checj in a month if there still there (dont drive this car often as its now my project) whats the go once I find these how do I fins where and its pretty much a time bomb now or? Thanks

  3. Conpletely agree but when you dont make lerge amounts of money its little harder.

     

    Trying to get it road worthy for now and will be purchasing a new belt the brand is SRP any good?

  4. Have purchased 3 drivers side seat belts with everyone telling me they are road worthy and retract properly. well they arent retracting properly and the last bloke nearly got belted can someone help me with this? am I doing something wrong?

    They seem to be getting stuck up the top

  5. When I removed exhaust manifold to change engine mount I noticed 1 bolt had been changed for a longer as due to a threaded hole though I tightened it to much and its I <3 Bananased, also the same with another bolt.

    So I have 2 threaded holes which are minced and was thinking about fixing and replacing with studs? Whats the longest bolt I can put into the head.

    Some suggestions and information would be appreciated thanks :)

×
  • Create New...
'