RE: Stereo upgrade: I had Autobarn do a complete install by removing my ICC and tap into/cut the speaker wires in the fixed loom plug behind where the ICC plugs into. They ran RCA splitters to a Kicker amp mounted under my drivers seat and then ran speaker wire back to where the speaker wire had been cut at the loom. They did this for each of the four door speakers which I upgraded at the same time. A set of Pioneer splits in the front doors and upgraded Pioneers speakers in the back doors. I also had them run a sperate Kicker mono amp mounted under the passenger seat for the subwoofer. This kept everything looking stock apart from the tweeters mounted in the quarter sections of the front windows. I can still use CD's in the original ICC and I run my iPhone straight into the 3.5mm jack. For Bluetooth connectivity and full phone integration, I ran a Parrot MKI-9200. I had to buy a couple of extra looms to make this fully plug and play (no cutting or splicing necessary). I used an existing factory loom plug for this which sits on the passenger side of the centre console toward the front. I think this plug is used for the original ipod integration?. The Parrot MKI9200 also Bluetooth streams music but sound quality is not that great, so I use it mainly for telephone use.
