Jump to content

adams355

Member
  • Posts

    529
  • Joined

  • Last visited

  • Days Won

    4

Everything posted by adams355

  1. Well a bit worse than thought, at least you can do it yourself. Where does that cam make power too? Might want to go just a hint smaller. Get a custom from crow see what they think should go in there. Just ideas...
  2. Bugger, was that the standard chain, what are you revving it too? Not too bad really.
  3. I'm late, but I'm here for the fight. I implied he was a tosser ages ago.
  4. Hey Puff, I think I'm keen on this companies set up as well, finally a proper set up, will only be looking for around 500rwkw, same as I can make on e85. Not really an e85 fan with the economy etc and still using the car as a sort of daily. Please lots of pics with the install and stuff cheers
  5. Drill out the venturi piece that pops out of the bottom of the module to 1.3-1.5mm
  6. You should of just put the new actuator in and not worried about the port, then taken it to blacktrack. But as we know sh*t happens. Round 2 mods?
  7. If you want a little bit more power then do the headers as well and maybe the cats. The catback wont make any more power but is louder, I would leave both mufflers in so there is no drone and the headers will make it a little bit louder anyway.
  8. If you are staying N/A the extractors and cats are about best thing to change for more power/torque. The rest of the exhaust should be fine, dont go crazy on size.
  9. Torque pro app isnt very accurate sometimes up to 4psi out. You have to set it to a guage and adjust it in the app.
  10. You only need the flapper mod at lower boost levels 8-14 or so. You don't need it with anying above 16 ish but you will need an appropiate actuator at that level 10,12,14 psi spring etc.
  11. Try some of these in Sydney area https://www.pcmtec.com/workshops
  12. Dont really need the dump with that turbo or power level. Anyone with pcmtec can tune it. Some around here might know who is still decent in Sydney area.
  13. If money isn't a issue Puff maybe you should stop taking freebies
  14. Well we all don't have money coming out of our arse Puff, I thought blacktrack would have come across the problem before.
  15. Not many ford tuners in Newcastle, BlackTrack is the only one using pcmtec that I know of (its my home town). Some random with a AWD dyno or someone who really knows what they are doing putting a tune in it...
  16. These guys are the ultimate professionals puff, if it was just a walk in shop I would agree 100%.
  17. Really they are going to street tune it, well you should be right with them.
  18. Call BlackTrack performance and see what they can do, they should know where to go either way.
  19. You will need a bypass system with a cooler and fan. There are a few cooler/fan combo's that are universal that you can fit up. https://www.mishimoto.com.au/automotive/transmission-cooler-kits.html https://www.enginemaster.com.au/remote-trans-cooler-fan-kit-dp13900 I originally used a Davies Craig cooler with fan and electronic controller (early model) but I found the tube n fin cooler not to be as heavy duty as I wanted, so I swapped out the cooler for a more robust bar n plate design and used the fan and controller with that. My cooler set up doesn't get over 80c and is often quite low around 50-60c on open road and highway. https://daviescraig.com.au/category/transmission-oil-coolers https://daviescraig.com.au/switches-controllers-fan-ewp I use this cooler, its way better than the Davies Craig and PWR designs. It looks to small but works really well. https://www.kaon.com.au/trucool-cooler-core-a-t-oil-slim-85le-4543
  20. It won't be making 400rwkw on 98 with a pulsar gtx. What month was it built? You want it from May 2006 on to have the typhoon engine or upgrade if you want to call it that. Nothing wrong with a decent daily but maintenance is a constant.
  21. Run the power up off the back of cig lighter socket you might have to remove the inserts around the transmission interior so you can pull that section out underneath the radio etc.
  22. I not trying to be a smart arse but just more on the awareness thing, mental illness like bipolar, and mental health are 2 different things. Mental health is like day to day things where bipolar, schizophrenia, OCD and ADHD etc are a disease of the mind and bipolar especially has a very high suicide rate. Sorry for your loss.
  23. Go to Forced Performance at Toowoomba and never worry again. Pay the money and know your in on a good thing with lots of support and expertise. Follow up tunes are much cheaper.
  24. Yea, thanks its not in any of the manuals or advertised in replacement or upgraded pumps, mystery oil pump business.
  25. Does anyone know the flow rate of the stock oil pump
×
  • Create New...
'