Jump to content

weavel

New Member
  • Posts

    19
  • Joined

  • Last visited

Reputation

1 Neutral
  1. Car : 2006 bf mk1 Trans: 6 speed manual Turbo: stock flapper mod 12psi actuator Boost : 11 down to 9 Valve spring : heavy duty not sure which Cooler : stage 2, plasmaman 3 inch piping, wrap around cold side Fuel : Bosch intank, injectors upgrade not sure size Exhaust : 3 inch, hi flow cat , middle muffler delete split to 2.5 inch Power : 315 rwkw Tuning : paramount performance Toowoomba
  2. Albuterol better than dnp or clen
  3. Best price I could find an fg motor was 1500 or up n don't really trust it. With labour doubt I would b under 3500. Got 140 on my engibe
  4. Best price I could find an fg motor was 1500 or up n don't really trust it. With labour doubt I would b under 3500. Got 140 on my engibe
  5. Yeh gave the go ahead don't wanna mess around anymore, though had a couple lined up if necessary. Vehicle is a 2005 bf early model though Hi torque have good feedback so putting my trust in them
  6. Update Hi torque stripped engine down bottom end is 100% fine. Needs cylinder head replaced bent some valves stems, snapped timing chain and one of the cams threw off its groove n bored into its guide. Total cost $3500 Still not the best scenario but could have been a lot worse hope she runs good for here on out as I like the vehicle but if any else goes wrong the missus will force a sale Thanks for help everybody was a learning curve for me
  7. Will update tomoro thanks for all the responses and feedback. Not looking the best after some of the responses fingers crossed still
  8. Even for only 5 mins/ 2 kms??? Guess I'll find out tomr the extent of damage
  9. My ebay skills are a little weak at the moment evidently. Cheers If need b Will prob take it to real dyno performance in Redcliffe they quoted me $1250 for sct flash tuner with 3 tunes. Supposedly owner before last had a sct in it but took it with him Vehicle is steadily growing in price. Not too thrilled about it. Money definitely ain't growing on trees in my backyard Just got a notice I've reach my post limit of 10 for the day is that correct???
  10. Anybody know if I get a rebuild wether the tune will still b on there or will it go back to factory? Or will I have to throw it on dyno?
  11. Yeh wilk u got a link to fg bottom end $2.5k ?
  12. Yeh I'm hearing u. It's got brake upgrade. Heavy duty twin plate clutch. N new pedders suspension all round. Let's see if I can snap a drive shaft hahhahahha
  13. Yeh it's all in the thread mas linked. Not the best scenario considering I wasn't putting too much pressure on it only running 11psi. I hear of people getting away running 16-18psi n driving it like its stolen n not having any probs
  14. $6500 sounds reasonable. Spool import sellin rebuild kits for like $2300. It's goin into hi-torque at Gold Coast. They reckon anywhere for 4k to 8k depending what needs replacing. Would love it to just need a timing chain kit hahhahahha I guess if I gotta rebuild it I may as well do it right n boost it up a bit afterwards It's was getting 420rwhp on only 11psi would b good to see what 16-18psi would net me Thanks for the response mate
×
  • Create New...
'