Jump to content

polishboi.luke

Member
  • Posts

    89
  • Joined

  • Last visited

  • Days Won

    1

Everything posted by polishboi.luke

  1. hey guys just wondering what kind of power have people seen go through these before they go bang? mines been built by bta motorsport and ive just done the engine so I was wondering how far I can go
  2. hey guys I recently built my motor (full forged internals) now the time has come to push it ive got a precision 6266 coming plazmaman billet race plenum with rail, 1000cc injectors etc. im looking to see somewhere around the 550-650rwhp mark (tuned to 98) my question is do you think ill need a surge tank or will a suffient intank pump be ok? im currently running the 255lph walbro but now with the plans on making more power I know I need to upgrade. I was thinking of getting the high flowing e85 ready walbro intake will that be enough? or should I keep the pump that I have in there now and get the surge pump
  3. hey mate sorry for the extremely late reply. I did like 35k km with them and had no isues whats so ever and they did get punished big time. certainly upgrading to slotted with reduce brake shudder. I just recently went to slotted and drilled and they pull up extremely nicely
  4. hey guys a few weeks back I blew my RHR axle. now ive replaced the axle replaced the oil in the diff etc. however im getting a rather loud whinning/whirring noise coming from my rear end now. im a mechanic by trade I havent really had much time to look into it but has anyone else here snapped a axle on there falcon and if ya did after replacing the axle did you come accross any noises>
  5. hi mate I had a person called A and K performance do my tune. he was located in ossy park. he no longer does tuning
  6. hey sorry for late reply theres a photo of my car its got worst hahaha. ive just got 2 Rockford fosgate t2's weighing 30kgs each hehehe . spoke to my partner recently aswell have been given a 10grand budget for a forged rebuild. should be able to go quiet far concidering im a mechanic hehe
  7. overheated brake fluid will give you a spongey pedal. and In extreme cases no pedal at all(very scary) ive been running protex grooves for about 2 years now done 20k km and ive got a heavy foot ive done 240km down to 100kmh quick stops and my brakes are still going strong. my standard rotors before that I replaced did 5000km fed them to the monkeys they were bent like a banana
  8. don't think the quality of the brake fluid will cause brake shudder to be honest. run a dial gauge over the disc and check the run out?
  9. tailshaft center bearing is cactus. there around 50-80 dollars to buy. replace your UJ while your there there no more then 20 dollars for a new kit. drives like a new car when you replace it
  10. whats your tailshaft bearing like? mine packed up not to long ago and I was getting vibrations all over the shop. I also fixed my mums one which was completely separated from the yoke and that was knocking like crazy on take off
  11. Hey guys just like to say hello to everyone im new to the forum thought id post about my car 2002 Ba XR6 Turbo Plazmaman tube and fin intercooler Plazmaman full intercooler piping Plazmaman cold air intake Xforce 4 inch dump pipe stainless Xforce 3.5inch hiflow cat stainless Xforce 3.5inch cat back stainless Siemens 60lb injectors Crocam heavy duty valve springs Walbro intake fuel pump Sct x3 flash tuner Bta motorsport built 4 speed Allfast torque comverters 3 histall Pwr transmission cooler Whiteline 30mm adjustable sway bar with adjustable links Whiteline 22mm adjustable sway bar with adjustable links Xzy super sport coilovers Nolathane differential bushes Protex groove slotted front rotors Protex groove slotted rear rotors Trw pads all round King wheel evolve 20x8.5 front 20x10 rear 225x35x20 front 275x35x20 rear 20% window tint Dewinged 8000k hid kit Alpine cda137ebt head unit Alpine mrf350 4 channel Alpine mrx m240 monoblock 2 x alpine tyre 12inch Sound stream ported box Stinger 0 gauge wiring Rockford fosgate t152s Rockford fosgate t152
×
  • Create New...
'