Jump to content

crikeyrob

New Member
  • Posts

    20
  • Joined

  • Last visited

Reputation

38 Excellent
  1. Hey Barnz, thanks for comment! Sorry for the delay... only took me 14months to reply. The car has been built to be powerful, comfortable and reliable. Once complete I plan to drive the car a couple of times a week, but it won't be my daily. It will make an appearances at shows, cruises and definitely at the track (mainly quarter mile). I hope it'll do a high 10sec quarter but we'll wait and see! The car will certainly be enjoyed, and I promise it won't be kept under a blanket all its life :-) I hope to get it back from the painters in June so I can begin putting it back together.
  2. Panel work has now started at Auto Passion 7 images updated on my build site here.
  3. Some new pics; * Seat belt points in * Radiator/intercooler and AC condensor in * Intercooler Piping complete * Center Console test fitted and modified slightly More info at www.boostedford.com
  4. Center console now has sides and internal mounting points welded into place. Full details at www.boostedford.com Rob
  5. Full stainless exhaust now complete. Single dump from turbo then twin system through GT Valance.
  6. Visit my build site www.boostedford.com where I'm putting a turbo 6 and ZF into a 1966 Mustang. Under table of contents page go to Ecu/wiring. This explains what I did to get it running with contacts of who I used. Rob
  7. So the laser cutting went to plan! AG Holding did a great job in Braeside Vic. It's coming together well! Small square plates will be welded to the underside of the console at a certain offset to the edge. These will then be tapped and allow me to bolt on the sides easily. I will provide an update as things progress further.
  8. Steve from Killa Kustom Kables did my harness. I sent up the full looms and he deleted all redundant wiring. It came back with fuses, relays and only a few wires to connect. I was very impressed.
  9. Decided to change the materials used for the center console moving towards a 4mm folded aluminium sheet. Took a lot of learnings from the polycarbonate mockup, so this was still a worth while exercise. I have designed the entire console in TurboCad and its currently getting laser cut and folded. Once complete it will be wrapped in leather and then two sides put on. Here is the PDF file for reference. I will upload images once I get it back. Centre Console Steel Centre Final.PDF
  10. Build website has a few new updates. New ValanceNew Drag Wheels & TyresCustom Center Console StartedBuild site: www.boostedford.com
  11. Build Website is now updated: www.boostedford.com Ultima D34 Battery Holder Installed In BootRollcage completeNew Front Radiator Support Panel
  12. Both gearbox and 9" rear diff is in. Workshop is just building a custom tailshaft with added slipyoke setup. We needed to do this as the FG has independent rear suspension. I will update pictures once complete.
  13. Build Site Updated: http://www.boostedford.com Fuel Pump & Filter InstalledBolt in 4pt Rollcage startedRear end finishedHandbrake Installed
×
  • Create New...
'