Jump to content

Infamooz

Member
  • Posts

    15
  • Joined

  • Last visited

Reputation

1 Neutral

About Infamooz

  • Birthday 28/02/1979

Profile Information

  • Gender
    Male
  1. Happy Birthday Infamooz!

  2. Happy Birthday Infamooz!

  3. Happy Birthday Infamooz!

  4. Happy Birthday Infamooz!

  5. Just wondering if you can fit BA FPV seats in a BF FPV F6? Reason for that is that BA drivers seat position can be lowered almost all the way to the ground. BF has a very high sitting position. Me being tall I'd prefer lower sitting position. I believe the reason you can't lower BF seat all the way down, is because of the seat belt minder and side air bag electronics that are under the drivers seat.
  6. XR6T will always be just a XR6T no matter what you do to it go the FPV!
  7. I just fitted small black Monza breather filter directly on the engine outlet on my BF F6..Works a treat! $12.95 plus $2 for the bolt to block the hole in the crossover.
  8. I have looked into this oil on the intake pipes problem on many international forums and yes it's very bad for the car. Not just the build up on all the components the incoming air has a contact with, but also oil reduces octane in the fuel. Therefore less power. I just fitted a small stealth breather filter in all black. Looks factory!
  9. FORDCRAZY mention that your power is from a hub dyno.. Realistically you have no more than 320rwkw... Hub dynos increase power dramatically!!
  10. Hmmm Monza aye... I pushed my previous car BF XR6T to 313rwkw with monza and other bits plus tune... I just replaced my factory BF F6 intercooler with a Monza, and the difference is very noticeable! Monza is about 30% bigger than BF F6 factory cooler and it flows twice as much.. Compared to factory BA/BF intercooler, Monza is God! Not bad for $207 from eBay!!! Free shipping included!
  11. Had same problem after getting a custom tune with injectors exhaust etc... Raised the rev limiter to 6450rpm and problem is fixed the higher the boost the higher the rev limiter should be raised because it can't keep up with such a instant hit of power
  12. .. And M/T did nothing! You really need piping kit plus ZF tune to hit high 11s... Forget power figures... Real drag cars go by P.B. , not a piece of paper showing its power
  13. FORDCRAZY you forgot to mention the power figures are from a hub dyno which always show alot more power than it actually is just so everyone knows..
  14. My BF F6 ZF does 13ltr combined
  15. I use full bottle of Castrol Edge 0w and top up with Castrol Magnatec to stop the ticking noise works great!
×
  • Create New...
'