xrtute

There varrston 3.3.2's if I remember right. I'd love to drop the front a bit more but it's bad enough out of drive ways and that as it is. It's my work ute usually has the rear loaded to. I went with the kings because there supposed to be revised to stop the diff rolling under acceleration and popping tailshafts I don't mind them at all. Might put a set of good shocks in though

Thanks guys yeah I'm wrapped with the car now the power is more than enough for a work horse. I'd like to improve the handling I little at the moment it's got ssl in the front and ultra low leafs in the back with a 1" block. Debating weather to go coil over fronts or just put a bigger sway bar in the front and maybe a set of caltracs in the back to support the diff and tailshaft a bit. Rides on 19x9.5 fronts and 10.5 rears Are there any 16" wheels that will go on the back of these to fit slicks to for The strip?? What will it run 1/4 taking guess!?!,

Hey guys just got my f6 tuned after having it for 2 years I installed -Bosch 1000cc injectors -pwr cooler -venom high flow cat pipe - mid muffler delete - plazamaman race air box/ battery relocation - plazamaman valve springs - plazamaman surge tank Bosch 044 pump And then Chris at bluepower tuned it to a safe 339.9 rwkw at 17psi on shell 98. Drives great like stock off boost and like an animal on boost. Struggles to get any traction first and second gear with 275 achillies 2233's and with the old atr 245's where turned into smoke anywhere under 80ks. Looking forward to racing it at Calder park have no idea what it will run with a set of et streets?? Any ideas with a zf? Ill get some pics and Dyno graph up soon as I get em Cheers Keith

spoke to a bloke from king springs and this is the listing of hights he gave me front coils KFFL-40SL = 15-20mm / KFFL-40SSL = 25-30mm rear leafs FOR-303SL = 40mm (370mm HTG) / FOR-303SSL = 60mm (350mm HTG) hope that helps a bit guys going off that id be happy if the front dropped 20mm and ill add a 1" block to the SL rears which should give me around 65mm in the ass... if not ill have to rip out the 4" lol

oh btw mitch looks fkn tuff that height

I got a set of kings the other day havent put em in yet... the bloke I bought em off said that super low leafs for a au-bf are ultra lows for an FG and got super lows for the front now im thinking there not gunna be low enough... cut a coil of the front and 1" blocks in the back???? what do yous think?

2010 UTE #327 auto lightening strike

just got my SL fronts and ultra rears for my f6... hope there low enough... I had lowering blocks in the back of mine when I first got it and the diff started making noises so I took em out and the noise was gone.. see how we go

build 327 FG F6 ute auto lightening strike leather hardlid 20" dark agents SL front SSL rear springs and im 23 from melbourne