Jump to content

Boosted_BF

Donating Members
  • Posts

    51
  • Joined

  • Last visited

Reputation

0 Neutral

About Boosted_BF

Profile Information

  • Gender
    Male
  • Location
    Melbourne
  1. well done from friday night steve, the look on your face when blake told you the 10.001 was priceless!
  2. gtvi's are wicked! little pocket rocket go cart
  3. I get a consistent 8.2 to the 100 measured (8.7 on the dash) between here and newcastle which I do regualy and ive seen mid 20's after at trip to tawonga via my beauty
  4. striping a camry engine the other week, borrowd a set of 12 point TTI sockets off a workmate to save me a trip down the other end of the workshop, rounded off 3 bolts in quick succession, they got given back in a awful hurry!
  5. looks the real deal (same unit at mine)
  6. Do not do the above if you have any respect for your vehicle! ethylene glycol serves 2 purposes, number one, it absorbs oxygen from water - helping prevent corsion, number two, it acts as any anti freeze agent (anywhere in victoria can go below 0 in mid winter, so anti freeze should always be used) redline water wetter isent all its claimed to be, through personal testing on the strip, road and circuit - gains are minimal if any and as for "get the car up to temp, Drop the water out of your cooling system and refill" - big no no, suden change between 100degree water when the fans cut in and your distilled water/coolant at 30 odd degrees can do fantastic things for warping a head or causing a head gasket failure! Best coolant in the buisness is toyota genuine, after stripping two 500,000km+ 80 series land cruiser engines and a 340,000km 1mz all alloy camry engine we've be running on the stuff there entire life to find the block and head in imaculate condion internaly sold me (all cars still had the genuine radiators too!)
  7. be aware buying snapon from over sea's - the warrenty is void
  8. yes and no to that comment, I rely on my tools day in day out, cant afford the down time from a broken tool, also cant afford an injury to my self if a cheeper tool lets go when tightening or loosening something
  9. this is my baby, filled with all the same branded tools also - been an expensive ever growing habbit, now also has a vice mounted in the back corner
  10. Valvoline Synpower MST 5-30 - Engine Valvoline Maxlife - ATF (ZF 6spd) Valvoline Syngear 75-140 - Diff
  11. yea another vote here for Project Mu stuff, use heaps of there gear and swear by it now
  12. zenetti kaotok's in black - but im biased
×
  • Create New...
'