Jump to content

Trent0

Donating Members
  • Posts

    574
  • Joined

  • Last visited

  • Days Won

    2

Trent0 last won the day on May 22 2019

Trent0 had the most liked content!

Reputation

297 Excellent

About Trent0

Profile Information

  • Gender
    Male
  • Location
    Brisbane
  • Member Title
    The Toxic Rocket

Recent Profile Visitors

2,962 profile views
  1. Some pop pop goodness that FPT just done for the ute
  2. The falcon still lives! I bought myself a new Navara NP300 in December and have left the ute in the shed since. Last month I got the diff checked out by a nice local workshop and they found it had two bent axles, buggered bearings, rubbing of the internals and the inside of the housing as well as a few other average things. Ended up welding the tubes to the center housing too. It never felt right since I had it built in 2012. Happy to report it feels like a new car.
  3. she's a tiny turbo! also just clocked 71,000km on the engine&turbo combo. The little P6466 holding on well
  4. I done a near on 2000km drive from Melbourne up to Brisbane last week and the old girl averaged 10.5L/100km on 98ron sitting on 110km/h (calculated with fuel put in vs trip kms) super stoked.
  5. precision 6466! Had mine on since Mar 2014 and 70,000km, nil issues made bang on *600rwkw* with the latest tune (935hp rated turbo though...)
  6. Cheers mate! Those whiteline control arms are what I'm after so I can bolt them straight in!
  7. I've looked all over their website and found no fitted kits, only bushes? I replaced the Tie Rod ends and sway bar links - all knocks gone, only squeaks remain All the ball joints were flogged in them.
  8. So I bit the bullet and took the ute in to a nice little workshop to get some noises in the front end checked. Nice little list of jobs to do Old mate said I'd be best off buying new Upper & Lower control arms with bushes & ball joints fitted as a replacement, less time and money to do. The harder part is finding parts online with genuine ball joints and bushes. Does anyone have recommendations for a seller?
  9. On another topic - does anyone have recommendations for a steering/suspension shop in Melbourne? So much knocking and banging, I'd say a few bushes need replacing.
  10. I've had a set of king SSL's? the lowest kings leafs, in the rear for the past 5 years. I'm still using the factory spacers (10mm?). Not sure whether or not to stuff around with different sizes or just drop it off at a diff shop to get looked at and sorted?
  11. I've just got a new one for it but still ahve vibrations under acceleration/load. Any suggestions? *Feels* like it's coming from the rear. Either hard acceleration or foot+brake it starts up. Cruising at 100, nadda.
  12. Last week I ordered a new tail shaft from GJ Drivelines. It's a Pro Series - $1890 for anyone curious. Super simple to fit up - really nice looking bit of gear. After fitting, it felt good to drive around. I noticed under acceleration for 50+ I'd get some not so great vibrations. I'd noticed lately that jamming it in lower gears the gear stick would move a considerable amount (with engine torque). Turns out my gearbox mounts were shagged. I was able to replace them for $50 and only took me 20mins to do! Thinking this solved my issues, I took another test drive. No luck. I'd noticed a clunk developed in the front end over the past week as well after driving on some rough roads the weekend prior, I put it down to a flogged out bush. After having a hunch and checking the engine mounts, I'd discovered I had a missing mount nut 😕 Still trying to source something that fits.
×
  • Create New...
'