Jump to content

darios typhoon

Member
  • Posts

    73
  • Joined

  • Last visited

Everything posted by darios typhoon

  1. Happy Birthday darios typhoon!

  2. that's serious looking cams what is that special coating on the cams
  3. taleb tyres does them ive got the nt 05 and the nt 05r and they work really well.
  4. it uses around 35 % more than 98 ron
  5. have a look at your crank angle sensor
  6. e85 caltex bio flex im using it in my car and its fine at the moment its e85 until march then it goes to e70 for the cooler months my car is at 600kw and all good on that fuel methenol is better but has its side effects which is very corrosive eats all the alloy fitting and jells up very quickly so race only and then flush with unleaded ive used it it years ago in my wrx

  7. out of puff ? even at low boost they dont perform as well as stock ones so it not out of puff at 15 psi
  8. yes mate did plus 2 on inlet and zero exhaust lost bottom and top then went -2 on both and it held the top end for a bit longer past 6000 rpm but no extra power and it lost bottom end from the inlet cam being on -2 so I put it on 0 on the inlet and that was the best it could do the next week I put the standard bf cams and vct gears back on and it went straight to 490 kw at the same boost heaps better bottom and peaked at 6000 rpm better mid as well stock bf cams worked the best with the turbo combo that im using those other cams in my opinion are crap they do nothing .
  9. im using b&m trans cooler with thermo fan and built in thermostat you can them from rocket industries there are 2 sizes to choose from no the thermostat will be on the trans cooler not in the gearbox
  10. as for the trans heat exchanger that's for heating the oil when cold start up but doesnt cool efficently enough with a lot more power and with a performance car ive used a trans cooler for a while now and no problems if the oil gets to hot it will burn and break down and clutches will burn so the cooler works well .
  11. if your worried about warranty dont do anything to your car
  12. hi quicker6 that happened to me as well the box has to be striped completely dominello racing transmissions in sydney did mine he has to do a rebuild with new clutches and strip the valve body down clean it all inside and it was fine. it cost about $3800 then after that I put a b&m transcooler on with thermo fan and with built in thermostat so the fan switches on at 75c and the trans oil I used was amsoil A.T.L which is very good works the best ive tried all the others and this one wins hands down . hope this helps
  13. you can go to the tip on there weigh bridge and weigh it and then you'll know what yours weighs or at the drag strip.
  14. I have tried when I first put them in I had 2 deg advanced on the inlet and it lost bottom end then jim put it back on zero and picked up the bottom end and alot more light throttle response so we are going to try more retard on both and see what we get.this will be done early in the new year.
  15. kyle did it pull peak power past 6000rpm and how was the bottom end I suppose it depends on the turbo used but a before and after comparison would be nice with the stage4s
  16. may be have to get suspension sorted first early jan front runners and front brakes and buy some slicks for the 15 inch rims then tune on e90 also have to get the true trac diff as mine will break and put me in the wall { no !}
  17. no im not putting the vct gears back on yet. im changing the cam timing from zero and seeing what works best as zero cam timing drops off to early 6000 rpm same as stock which is not right so soon will see if they dont do much the stock cams go back in with the atomic cam gears and if the cam gears dont work with the stock cams then the vct cam gears go back on as it was when it was stock
  18. yes engines in running in just did tune with with stage 4 cams and not very happy with them but going to do some cam timing changes and if it performs the way they should they stay in if not stock cams go back in .jim got 480 kw with pump fuel so will see in about two weeks hows your one going quick 1.
  19. hi kyle interesting what do you mean

  20. answer to your question the 3000 converter is really good its worth doing the converter stalls up in first and second only and its like stock when driving normal just when you take of harder it will go on the stall it brings the power on quicker from down low in first and second gear mine was done by dominellos auto 96515803 tony you will be very happy with it .
  21. from engine care systems name karl phone no 0755305455 they have the hole ams oil range
  22. hey guys I got the zf and using amsoil a.t.l. auto trans fluid and its with in spec to run the zf auto I've put 600kw through mine and no problem it even good when dead cold no flaring or slipping ive also tried the others and its heaps better .with big power you need a trans cooler.to keep oil good . hope this helps
  23. how you got any thing as im doing it on thursday if not ill get the msd one cheeres dario

  24. well done guys great effort. now theres something for bev to chase
  25. the tub weighs about 200 kg and a tray weighs around 100 kg but you will lose traction because there will be no weight on the rear you will have to do a full 4 link rear end and 90/10s on the front to get some traction
×
  • Create New...
'