Jump to content

yellowtyphoon

Donating Members
  • Posts

    31
  • Joined

  • Last visited

Reputation

0 Neutral

About yellowtyphoon

Profile Information

  • Gender
    Male
  • Location
    sunshine coast
  • Interests
    Cars

Recent Profile Visitors

1,381 profile views
  1. Mal Woods sell them as a replacement for Ford. Dellow converstaion have them for $3799 see below Tremec T56 Magnum 6 Speed The Kingpin of Tremec's high performance lineup. The T56 Magnum takes state of the art OEM technology, and pairs it with the most popular features of the all-business TKO 5 speed. The T56 Magnum easily tolerates up to 700 ft lbs of tyre devistating torque. It does this while also providing short, crisp shifts and improved performance. Known in it's OE form as the TR-6060, the T56 Magnum is an aftermarket version of the same transmission found in many of today's most revered factory sports cars, delivering refinement where you want it, and strength where it counts.
  2. An idiot in Brisbane who was using my car for practise and my bank account to retire on !!
  3. Have changed the Manifold to a 6 Boost , GT4294 turbo and dual Tial 38 mill wastegates. So fat 498 RWKW at 22 PSI on 98 and 543 WRKW at 25 PSI on E85 on Kyles dyno. Power delivery is so much smoother and we expect a lot more power now we have a 200 litre of E85 to play with on the dyno. next roll cage and race seat
  4. HI, who has the exact specs of which Tremec Magnum will bolt straight into a BA 2 F6 ? There are so many versions and I want to get the correct one.
  5. Guys, there are heapss of full and half days that you can attend at Lakeside. great track expecaily if you live on the north side of brisbane. Get big speed down the straight , but watch out for the fences !!Have a look at the website for events \http://qldraceways.com.au/main.php?menu=qri02
  6. Yes it is ,bought it and the forged piston slap turned out to be terminal!! Have sent the national debt on it from PBR M series 6 and 4 pot monoblock brakes , true track with 4.11s , Resolution billet flywheel ,Jim Barry 3800 lb clutch, Mal wood tail shaft , 1000hp axles , Tien suspension and REAL 525 on 98. Has 18 by 8.5 and 9.5 Enkie GTC with 245 and 285 Falke RSV04 semislicks. It now goes stops and corners. The dyno I had from the previous set up was crap and on racing fuel ,this set up has more power and plenty of reliability. Next are racing seats and belts , rollcage , Mal wood gear box , and a good Suspension set up for the track.We call it big bird , my wife calls it the money pit or the taxi depending on what we have spent on it recently dyno f6.pdf
  7. Going the GXT42 as well. Speaking to Murray Cootes as currently the Tein set up is not working on the track
  8. Hi , cant use the power now , need to look at bigger rears or more progressive way it comes on
  9. Have an Atomic motor with Fat rods, Hi mass Balancer ,Main girgle support ,Atomic Anti pump up Lifters. Nispro Inlet and exhaust manifolds , 5 inch Dump to 3 inch exhaust. Turbonetics GT850 turbo , 1000cc injectors and heaps more I can not remember
  10. Have changed tuner to Craig at Torque and Tune in Caloundra , and he has got us 525 RWKW on 98 pump. Changed injectors to 1000cc and the rest is tuning. Only trouble now is getting it to the track , as the 285 semislicks are not up to it. Looking to change the exhaust maifold and 850 Turbonetics for a 6Boost setup with twin wastegates and new turbo. The old setup is great power and would suit a daily driver or drag car but on the track it is very hard to get out of the corners without wheel spin. Putting new manifold , wastegates and turbo , then rollcage , better suspension as the tien is not much chop and seats and harness. Then just go Porsche chasing. Any one have a suggestion on a good suspension guy and roll cage ?? . dyno f6.pdfdyno f6.pdf
  11. Hi does any one have a contact for Blueboost or Hi Torqu on the GC Please ?
  12. Hi can you please pm me the shops name as I am on the look out for another one in Brisbane from a similar experince and do not want the same stuff up again?>
  13. One between the turbo and the intercooler and one between the intercooler and the Inlet manifold. Was told to do so by Tubo supplies in Townsville . Seems to work okay . see photos one under each guard .
×
  • Create New...
'