Leaderboard

So yerp pulled the 6r80 down today. Nothing looks too rooted in it, not that I'm a seasoned trans builder or anything. All of the steels are in good condition and all of the shafts/gears etc look and feel alright too. I'll get to measuring later in the week to confirm stuff. The car that the trans came out of had a torque converter failure and had put some metal into the trans which is why I only paid $50 for it. I pulled the trans pump apart to have a look, as that will be where the metal starts it's journey into the trans. Sure enough the small inner gear has some damage and the pump cover has some damage too. It's not so farked that it wouldn't work at all but I'd rather do things more proplyer so will address it. I reckon I'll swap out the stator shaft from the 6r80 into one of the zf pumps and use that, otherwise I can get a 6r80 pump for about $500, or there might be something else I can do with parts/gear swapping etc. The bushes in it need replacing so I'll go for a bronze bush kit, along with a couple of other bits to recon the zf valve body, replace needle roller bearings as one had fallen apart, and whatever else needs replacing apart from seals, as they will all get done anyway. So yeh that's about it really. Will drop off the input shaft and converter on Wednesday and see how we go from there. I was thinking about cryo treating the output shaft too just for more peace of mind. I'm leaning toward keeping the stock converter now as it has a better lockup than a single disc gm converter but I'll see what the trans guy reckons, as it might not be up to the power level I'm going to throw at it. Haha one part of me wants to just buy a built trans but I'll have a crack at it myself first and if I fark it up, I'll reevaluate then.

No! Happy Monday to you!

loving this

This is going to be so well done when it’s finished. Loving the new fastener hardware too