Jump to content

Leaderboard

Popular Content

Showing content with the highest reputation on 03/03/18 in all areas

  1. The gearbox grinds as he puts it in park because the tailshaft is turning still. Holding his foot on the break won't stop the tailshaft turning if the half shaft is broken due to the open centre diff spinning on the spider gears rotating the broken half shaft. Open centre diff strikes again haha
    3 points
  2. Auto or manual. Each and to there own. Dyno results from different states, now there's a minefield or cheap intercooler versus a quality intercooler now there's another minefield.
    2 points
  3. Update on my Territory, ran a 13.3 last night on the quarter with me braking before the line cos was going to break out running DYO, so should have a 13.1 in it. Stock cooler was really battling so next step is a front mount, battery side intake & valvesprings to hopefully get down towards mid 12s. Id definitely recommend going bigger than 40lb on injectors as not a massive price diff and allows for future mods. Driveline wise, at about 300kwaw my ZF is starting to flare a bit (although it has done 180k) so I won’t feel too comfortable pushing it much more, no wheel spin of course being 4WD so launches are pretty hard. Il probably stick with early 300kws and hopefully consistent mid/high 12s to save having to drop big money on a built box. Apparently the input shafts are often first to go in the ZFs.
    2 points
  4. Picked up a bf mk2, was advertised as ba mk2 but is 07/06 build with zf. Old owner only advertised cars faults the list was. - engine light on - headlining sagged - handbrake cover taped up - steering wheel worn - coil cover not fitted - engine oil leak - coolant leak - bonnet has bad crows feet. Had 10 months rego picked it up for $4k. So far ive fixed engine oil leak which was tappet cover gasket, engine light was cam solenoid. Coolant leak was header tank . Also picked up f6 cold air, k&n filter, second hand plasma man intercooler and x4 controller. Plans are for a tidy street car as I have a vk 5.0l with a turbo in the build as well, looking at doing the following - new front mounted gearbox cooler - gearbox service - fuel pump and injectors - dump pipe and cat - tune and have fun.
    2 points
  5. Been a while since there has been much action in the Territory section here but I found it really useful with planning the mods on mine, so thought I’d fire something up again to see if people are still out there modding them. Thought it could be a list of Mods, dyno figures & quarter times if you have them. I’ll kick it off. Mamba GTX3584R Turbo 80lb Siemens injectors Walbro in tank 450lph fuel pump Still running stock Intercooler (didn’t have $$$ to upgrade but next on list) Custom Intercooler water spray set-up using redirected window washers Running E85 (have a Gull E85 pump 2 mins from my house so easily managed and thought better to run cooler until Intercooler replaced then I’ll do 98 tune too) Dyno tune at Torque Performance in Auckland 290kw at the wheels running 12psi Havnt been down the quarter in it yet but did a low 14 dead stock so hoping it might sneak into 12s even with stock Intercooler still holding it back. Will head to track next Friday.
    1 point
  6. Turbo to manifold has 2 on top 2 below. Turbo to dump has 5 total.
    1 point
  7. 1 point
  8. https://www.animatedknots.com/indexbasics.php
    1 point
  9. The guys are suggesting the 4 bolts that connect the turbo to the exhaust manifold .
    1 point
  10. Yeah I live in Pukekohe and have a pump 1 minute from home and my Mrs just cruises around town in the TT during the week so too easy!
    1 point
  11. There is nothing in the manual that mentions running in and it recommends oil for fitting. My thoughts are; You are using a roller follower that doesn't scrape the camshaft so you don't need to do the high oil pressure run in that a flat tappet cam needs. Oil will be fine on the lobes for the same reason but obviously assembly lube in the lobes won't hurt it.
    1 point
  12. It does sound like one of the cv joints has broken, based off this thread.
    1 point
  13. Have a quick look down the front of ya pants. That's a half shaft.
    1 point
  14. Any pictures so I know exactly which ones to do? I’ve got a vague idea but pretty sure I’ve done those already.
    0 points
This leaderboard is set to Sydney/GMT+11:00
×
  • Create New...
'