Leaderboard

Wmmfg Holidays FTW Self explanatory

Hondas don't run they walk

I can see you nude in the tapware Giggity PS your boob is a funny shape and you have no areola

By 2005 BA2 XR6T has done 370,000 km and still goes like brand new. I've had it 9 years this year and done about 300k of that 370k myself. She's on her second turbo due to the original getting compressor droop at 250k, but aside from that it gets regular engine and Trans servicing and is still going strong. At 500k I'm planning new valve springs and probably a timing chain and then a flash up to 270kw I think.

Filled up with fuel, jump in turn key Car has electrical meltdown, dash flashing faults and carrying on, won't start Radio on the fritz, yelled every swear word, turned key off for ten mins and tried again, started and drove like normal ! Stupid cars

My bad it is different to mine. Top pic looks the same but side pic you put up shows its a fair bit different

I found my spring to be quite soft and fancied abit more flutter so stuck a few 10c peices in there to increase the spring pressure.

You sure it's not adjustable? That looks exactly like mine and mine is adjustable. You just unscrew it a bit

I like it. They pre released it a few months ago and have been waiting its start, second ep in and I'm still hooked...this may wane though as it was a little repetitive in the second ep. Jerry Bruckheimer production so there should be some good stuff in it. Anyone who is a TV junky like me do yourselves a favour and get hold of "Next Episode" App for mobile devices. First app I have ever paid for, its the best thing since the old TV Guide you used to get once a week and highlight all the good shit coming the next week... http://next-episode.net/

Just get J@t to draw some on with an Artline. If you like the look get permanent makeup artist to tatt them in place. Then you can love the word again!

I didn't realize Ford had department called "customer service "

Sucker for Ford's awesome customer service then, eh?

Yes, he is still under test rider status, but he is on the GP15 Ducati. Dovisioso is on the GP16 Ducati and is languishing around 15th spot. The commentators did say that it was extremely likely Stoner will get a wild card ride, maybe 1st round at Qatar That would be awesome in so many ways ☺☺☺☺☺☺☺☺☺????????

Being back on my normal roster at work. Funny how you set up your own little routines and luxuries etc. While I was swapping around on the other swing for a bit I had to stay in a different room at camp, given I was on site at the same time as my usual back-to-back. Missed the extension cord I've run around the door frame to the ensuite in my room that allows me to plug my phone in next to my bed, rather than across the other side of the room. Few other little bits and pieces, like gaffa tape over the lights on the aircon and the fact I've silicon sprayed my ensuite door so it doesn't creak...oh and the way the TV is mounted. Funny how you adjust to little, insignificant things like that...but they provide a strange sense of comfort and familiarity. Also played squash last night for the first time in a couple of month, felt good to run around and actually push myself a bit.

Yeah I'm pretty lucky. All my toys have been put together over the years. The latest news is that Im converting the K6 GSXR1000 to a drag bike and my young bloke will be racing it in Modified Bike next season. So on the weekend we fitted swingarm extensions and a used slick from my bikea and a super low race seat. I already have the lock up clutch in it and lowering links in the rear. The Rucky Strike livery will have to go so were thinking about what to do for paint once we get some race glass on it.

Get a billet csc from MWA only about $180. The VZ commo part is a cast ally body but still has a plastic piston.

plumb-back just sucks for both aesthetics and noise

Thanks guys. Might get the rotors skimmed, get some Bendix Ultimate pads and do some braided lines and see how we go. Hopefully will fix the shudder. Ive had pretty much every bush replaced in the suspension with the Pedders

What you on about Kyle? I have no idea what you mean by Noise Factory.... As recommended by Luke, try these out: http://www.carbuilders.com.au/

Got nothing to do to the race bike and is great shed weather so I wheeled the old GSXR1216 Turbo out and am going to see if I can sort the fuelling issues and return it to the road. This bike is an absolute blast to ride but im thinking of going to a lower psi waste gate spring to make it less of an animal. With stock wheel base, it'll rotate around the rear axle in any gear. With the 3" extensions in, it only does it in the first three. Got some news on the Rucky Strike K6 1000 too later on today.

Poly-Vinyl Acetate or a spray on contact adhesive.

I can't get Tapafark to connect and it keeps saying - Network error Please try again later (get_config) I signed out/signed in and it still wont work farken...................... :( Version 5.5.1

Working through it guys. Have a list of about 30 things that need fixing.