Leaderboard
Popular Content
Showing content with the highest reputation on 27/09/13 in all areas
-
Hey mate this is a tuff one as toads said You might only be making 400 but you might be a few hundred NM up on the comparison car, numbers are numbers and its easy to get caught up in it but just yesterday we had a car come in that did 288rwkw and after a retune it did 290rwkw , so what u say but have a look here Where the power graph ( and also torque is picked up in the mid in a huge way ) please dis regard the length of the run ( yes u chit stirers ) as this was just the last power run all the "work" had been done previously and I have no issues with ending runs after they taper off Now the torque ( not on that page ) gained truck loads on the same speed/rpm and the owners praises after collection was enough to know it had big gains but just not in rwkw Your car seems to have good hardware and if it is CMS you have to be happy a very knowledgeable tuner has done the tune, that being said everyone's engine is slightly different maybe yours did'nt take timing as well as the bloke down the road, maybe the tuner had that feeling is was working hard enough and any more was just creating heat,slippage,issues even Most tuners are very approachable in regards to "how" and "why" just ask there may be a very good reason or none at all That just might be all is has, who knows but as I said u may be packing a killer torque curve that is not displayed and this is what gets u down the strip faster than the bloke with 450 but bugger all of the NM's Hope this may of helped3 points
-
It's a stock bottom end....400kw is what some would call a safe limit. Just because there are a number of members running good numbers on a stock bottom end doesn't mean it can be safely flogged. This is not a place to discuss why a tuner hasn't turned up the wick....It's all speculation and no meaningful info. Time to talk to your tuner and report back. I mean this in the nicest possible way.3 points
-
3 points
-
2 points
-
Don't park your car on the street in Freo on Saturday! Win OR lose, hahaha. Keen to see Freo have a win for the sake of my tragic friends who love them. Also lived in Freo many a year myself but never really made the swap when they were formed. Still go for them against other states though!2 points
-
2 points
-
I bought a hoist can hear all the WA members who have had their cars in my shed collectivly shout ABOUT TIME!)2 points
-
Muchly agreed I have tried to give him buzz just waiting for the call, It's nothing against the tuner, It was just to see if there was anyone else with similar mods making the power what I felt it should of made. I understand it is standard f6 short block but there has been 450rwkw ba with a factory bottom end (gtx) , what has lasted for over a year or so with no issues and It had less mods as I believe. I don't like to flog the ass end out of my cars endlessly on a daily basis, Just once blue moon I head down to the track do my day and return but don't go stupid. I also service my car every 6000km I change the engine oil and filter. So I feel it should last along time2 points
-
52 and just bought my first FPV three weeks ago (2003 BA GT). Aren't marriage breakups great2 points
-
I understand totally what this member is going through It would be like paying for a BMW 540i, expecting the relevant performance and comfort, but being delivered a 318i instead. He has already paid the tuner once to get the car tuned, it seems to me that the tuner has spent maybe a few hours on it, it has made a respectable number on a safe tune, so he has rolled it out of the workshop, and started on the next job. Instead of trying a few things, pumping some psi into it, and see how it reacts. The tuner should have had all scenario's tried and tested, so when the customer came to pick the car up, he can explain and demonstrate why the car is set up the way it is. Eg customer asks why isn't it running 20psi? Won't the turbo and mods support that? Tuner response: Well I tried that, the car seemed to not make the expected power, here is a graph demonstrating relative afr, psi, and power output. But if you try a new cat (for example) I'd expect it to make more, or handle 20psi. When I pick my car up from my tuner, I know my tuner has my car running at its optimum, and has tried all avenues to get the most power out of it, safely.2 points
-
oh sh*t look out Freeze is gonna be sick again surprise surprise Freeze is as sick as Trent is omoh2 points
-
There are heaps of good tuners out there. The fact that they don't get a mention on here, shouldn't detract from their ability. Site sponsors do a great job and theyre on here for a reason. Trust me, there are plenty of guys out there getting results. Just no big song and dance I guess2 points
-
Hey all.Just wondering what most GT,s are running down the 1/4 with just a tune and filter? Hi Torque are tuning mine on Wednesday and I will probably run it down the track as soon as I can chase up some Street MT,s They told me I should expect around 360-380rwkw1 point
-
^^^Hey Trent!! Yeah I'm alive the gyn is my second home at the moment. Gotta catch up .... When it ain't raining.1 point
-
Yep roger that, I know what you're saying, hard to communicate without body language!1 point
-
Yeah, cause 440 at the treads just doesn't friggin cut the mustard these days..... Remind me never to drive any of my own cars down to Adelaide when I visit.... even if I bring my XC down with 567, all ill be hearing is "is that all its got? fluff's pram makes more than that"1 point
-
Yeah.I would expect around a high 11 with that power and some decent rubber.Im interested to see what it can do as my old 315rwkw XR6T did high 11,s at 118-120mph.1 point
-
1 point
-
Jet the blue line has a lot more boost....I'm not sure what you're trying to show here? More boost = more power/torque because you were willing to turn it up? I noticed that 'shame' was mentioned above. 400 on 16psi is a good result and there is zero shame in that!!!1 point
-
1 point
-
Actually have a 4" intake already (Turbo side intake) with a Silicone reducer into my stock 0.5 cover. Just thought it would be cheaper to use my existing 0.5 cover, get it machined to fit the GTX3576R compressor wheel, and retain the advantage of fast spool up.1 point
-
Is this gunna be the norm on the beach this year???????????please say yes1 point
-
Getting a lot more sex, great workout, but doing not much exercising anymore. I need to do a lot more on the arms and shoulders., got this far but nowhere near a planche yet1 point
-
1 point
-
1 point
-
1 point
-
1 point
-
1 point
-
My bonnet bulge was a bit more expensive. It set me back more than fourteen grand.........but then again it's attached to the rest of the GT1 point
-
1 point
-
Welcome back shyfrd need more talky less reading.........lol Weather much better wind has gone......ya!! Just mowed the grass so can relax on the weekend. Hospital all ok?1 point
-
1 point
-
Not being able to grow a beard is why I can never own one of these bikes.1 point
-
my car is going very well thanks to chris and his tuning ,we are trying a few things so its a work in progress atm but the hp software is awesome imo if you know how to use it.1 point
-
1 point
-
Hey so who's going to powercruise next weekend? Im flying over for it.1 point
-
1 point
-
1 point
-
1 point
-
1 point
-
Looks good man I got the same one can't wait to get it in. Nice all round package there bomber and the trailer mad. I like it a lot.:D1 point
-
Yea no offense taken. I have done my research and the reputable guys are good, no questioning that, but he knows his stuff and im confident he will do a top job. Has tuned plenty of my mates cars with great results. Im going for a conservative tune so not pushing the limits to much. He is also installing the pump, cat and injectors in the 3 days so its not just tune time. I have dealt with the "10 year experience tuner" before and that's why I am careful1 point
-
Pics on the CRG Facebook page. Looks like the stock ford exhaust housing with an external gate hanging off the side. I'd be very interested to know what mph this is capable of on only 17psi. What's the turbos exhaust and compressor turbine specs?1 point
-
Nope, Moves a tiny bit and provides an additional intake source... but I just wanted something hanging out of the bonnet.1 point
-
Torque always follows the boost curve closely (as seen above), and yeah I agree....add timing and you will raise torque in most cases. That last graph shows a 50kw increase at the top end and gains everywhere else. Had a larger turbo been chosen the gains down low from using e85 would be lost and if your target boost is still say only 19psi (required for 450 on e85) then the extra airflow from a larger framed turbo isn't really needed. It's a different story if you want to go all out though OR the larger frame turbo is pushing a lot more air at the same pressure ratio!!! Bomber I went from 350 to 400 on the same boost (15psi) going to e85. If the GTX3576 can hold ~17psi at the top end, you might just make it!!1 point
-
1 point
-
1 point
-
1 point
-
Well, goes something like this. I discovered this frame on a job that had a hilux extra cab tub on it that had been in an accident. Was in the owners way. Carton later, towing home. Grinder came out and buzzed the tub in half - off to tip. Had sourced another new hilux tub ready for $400 but said nup, gotta be Falcon. Rang my local dealer and as luck would have it they'd just delivered an XR with a tray and the owner didn't want the tub. Negotiated a 'very' reasonable price and picked it up the next day with brother-in-law and his brother. Measured everything up and cut 75x50x75mm long 2.5mm RHS mounts which were welded directly onto the frame under the ribs. This I knew would give me correct ride height - about 10mm lower than stock XR. The axle was too short and Expensive Daewoo pattern so ebay'd it for $50 - gone. Rubber had gone off on the XR (about 60% left) so bought two new rims and tyres. They went on the car, the others to the trailer. Calculated the axle length 70", which ended up 5mm in from the outer with the 9.5" ET40's and 275's. The frame was gal but painted it black. Four sets of hands and on she was lifted to the frame. Drilled my holes into the new mounts and rattled them on. To finish, I'm making a checker infill front panel and, fakey zort tips to match the car, lol. Going to fit a soft cover for now. Has an extended draw so tows perfectly and backs a treat. Total weight a shade under 300kg. 22kg on towball. GVM 750kg so can carry 450kg legally. I'm the President of the Gold Coast Performance Ford Club so it will mainly be used for club duties plus carrying my tools for the odd Saturday cashie. If anybody gets a tub and wants to build one I'll shoot the measurements. Cheers, Bomber.1 point
-
gotta hand it to u spiro u have done more development on these things than nizpro, and mainly single handedly. u were into it way b4 dlm was established. weather u pay people to work on your car or not they were your decisions/ideas. there is a huge amount of passion when u spend that sort of coin and dedicate that much time. I hope the prevoius page made u laugh mate it sure did me, get well soon buddy.1 point
This leaderboard is set to Sydney/GMT+10:00