AzSilverBullet New Member 7 Member For: 6y 9m 8d Posted 20/06/17 11:21 PM Share Posted 20/06/17 11:21 PM (edited) So there is 4 different ones for FG. I am hoping I can find out which one I need before I pull mine out. My car is a 2008 FG XR6 turbo sedan auto. Does anybody know if my particular model runs a certain one or could it be any of the 4? There is - 30mm inside diameter with 11mm or 25mm offset or 35mm inside diameter with 11mm or 25mm offset. Edited 20/06/17 11:27 PM by AzSilverBullet Link to comment Share on other sites More sharing options...
Puffwagon Puff Gold Donating Members 15,045 Member For: 9y 1m 28d Gender: Male Location: South Australia Posted 20/06/17 11:29 PM Share Posted 20/06/17 11:29 PM I got under my car and measured. It only takes 5 minutes. 1 Link to comment Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 28,239 Member For: 15y 11m 19d Gender: Male Location: Melbourne Posted 20/06/17 11:30 PM Share Posted 20/06/17 11:30 PM or speak to Hardy Spicer and tell them your specific make/model/trans setup and they'll be able to tell you which specific one will fit. 1 Link to comment Share on other sites More sharing options...
Puffwagon Puff Gold Donating Members 15,045 Member For: 9y 1m 28d Gender: Male Location: South Australia Posted 20/06/17 11:33 PM Share Posted 20/06/17 11:33 PM That would work as well. Link to comment Share on other sites More sharing options...
AzSilverBullet New Member 7 Member For: 6y 9m 8d Posted 20/06/17 11:38 PM Author Share Posted 20/06/17 11:38 PM It looks like it would be hard to get a accurate measurement of inside diameter while the bearing is on car. How did you do it? Link to comment Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 28,239 Member For: 15y 11m 19d Gender: Male Location: Melbourne Posted 20/06/17 11:42 PM Share Posted 20/06/17 11:42 PM vernier caliper. Link to comment Share on other sites More sharing options...
Puffwagon Puff Gold Donating Members 15,045 Member For: 9y 1m 28d Gender: Male Location: South Australia Posted 20/06/17 11:53 PM Share Posted 20/06/17 11:53 PM Yep that's what I used. Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 18y 6m 5d Gender: Male Location: Perth Posted 21/06/17 12:56 AM Share Posted 21/06/17 12:56 AM 1 hour ago, AzSilverBullet said: It looks like it would be hard to get a accurate measurement of inside diameter while the bearing is on car. How did you do it? If the car has a uni midship its 30mm ID If it has a cv midship 35mm ID Of all the variants of Ford driveshafts this doesn't change. 1 Link to comment Share on other sites More sharing options...
AzSilverBullet New Member 7 Member For: 6y 9m 8d Posted 21/06/17 12:58 AM Author Share Posted 21/06/17 12:58 AM Ok so what about offset bearing height? Maybe it depends on auto or manual for 11mm or 25mm? Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 18y 6m 5d Gender: Male Location: Perth Posted 21/06/17 01:13 AM Share Posted 21/06/17 01:13 AM the bearing height is the same, manual car get a spacer between the bearing mount and chassis, auto's do not. What bearing are you looking at? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now