k31th less WHY; more WOT Site Developer 28,291 Member For: 16y 9d Gender: Male Location: Melbourne Posted 26/10/17 07:01 AM Share Posted 26/10/17 07:01 AM a few "hot" and then cold cycles will do that to them haha 1 Link to comment Share on other sites More sharing options...
Puffwagon Puff Gold Donating Members 15,116 Member For: 9y 2m 21d Gender: Male Location: South Australia Posted 26/10/17 07:06 AM Share Posted 26/10/17 07:06 AM Haha yeah it will. Link to comment Share on other sites More sharing options...
jabtronic Member 70 Member For: 11y 9m 29d Posted 30/10/17 08:47 AM Share Posted 30/10/17 08:47 AM I got 2 years 4 months and 55,000kms out of my ATR2s and there was was still more tread on em than that Anyway, for purposes of this thread 18x9.5 +10 fronts with 235/40R18 Michenlin Pilot Sport 4, these tyres don't stretch as well as I expected. 18x11 +8 rears with 265/35R18 Achilles ATR2 Front guards are rolled/pumped maybe 10-15mm further out than standard. Rears have been pushed out very little by adjustment in the wheel arch brackets but they are not yet rolled. I will need to roll them to go lower, as pictured the guards sit on the tyres with axle resting on bumpstops, raised it back up for now. The front tyres stick out slightly but this is with neutral camber. They will tuck in easily with a little negative camber. There is no scrubbing at all. 3 Link to comment Share on other sites More sharing options...
OZYWALKER XR50T Gold Donating Members 2,795 Member For: 10y 11m 18d Gender: Male Location: Western Sydney Posted 30/10/17 09:47 AM Share Posted 30/10/17 09:47 AM How the fark do you get 55000 out of them. Ill struggle to get 5-6k a set lol.Not a fan of the stretch at all, I reckon the utes need at least 295 rears to get traction. Get some neg camber up front and fit 265s and roll the rear quarters (remove the brace and replace after rolling) and you'll get 305s in the rear. 1 Link to comment Share on other sites More sharing options...
MBAF Bronze Donating Members 2,156 Member For: 7y 8m 4d Posted 30/10/17 09:56 AM Share Posted 30/10/17 09:56 AM Most people dont drive like us ozy 2 Link to comment Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 28,291 Member For: 16y 9d Gender: Male Location: Melbourne Posted 30/10/17 10:16 AM Share Posted 30/10/17 10:16 AM You'd hope that most of us (xr6t buyers) would have a propensity to drive like that, at least 1 Link to comment Share on other sites More sharing options...
MBAF Bronze Donating Members 2,156 Member For: 7y 8m 4d Posted 30/10/17 10:35 AM Share Posted 30/10/17 10:35 AM havent seen you rip a skid yet keithy 1 1 Link to comment Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 28,291 Member For: 16y 9d Gender: Male Location: Melbourne Posted 30/10/17 11:47 AM Share Posted 30/10/17 11:47 AM Just don't video it... Link to comment Share on other sites More sharing options...
camo86T Silver Donating Members 1,810 Member For: 10y 2m 7d Gender: Male Location: SW Sydney Posted 16/12/17 10:03 AM Share Posted 16/12/17 10:03 AM Been trawling through this thread a bit lately, heap of great info On 27/05/2015 at 6:54 PM, Seaton said: Just order straight from Perfectrun.jp and you'll have them in a week. And, it's cheaper than buying here through Jdm... Did a few comparisons, seems these days JDM concept standard prices are within $20 of perfect run's landed prices, to the dollar on the 19x9.5 and 19x10.5 kiwamis I've got on order. With JDM concept's 10% (up to 20% on SSR series) off special not finishing until end of December, worth a look if you're after quality jap rims. Link to comment Share on other sites More sharing options...
espoig Donating Members 249 Member For: 9y 7m 14d Gender: Male Location: Mundaring Posted 21/01/18 06:12 AM Share Posted 21/01/18 06:12 AM Looking at getting some Koya sf04 in 19x9.5 +20 front and 19x10.5 +28 rear for a Fg Sedan stock height will they fit alright and be semi flush? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now