Jump to content

Show us your PC and/or Gaming setup


k31th

Recommended Posts

  • WOT?
  • Moderating Team
  • Member For: 11y 1m 3d
  • Gender: Male
  • Location: Frankston, 3199

17c, 15c, 16c were the CPU/GPU temps this morning when I got up.

Can still see a few air pockets in the blocks and am sure there's more in the rads to trickle out.

 

That said, ambient felt like -32c. Will see how they are once the heaters warm up the house.

 

Fans are awesome - about as loud as a hard drive spinning. Most of that is the original 140mm fan in the front of the case - will add that to the MB fan control and slow it down or get a new, quieter one.

 

Can feel air coming out of where the rear fan was (I removed that) so the pressure in the case seems good.

 

8 hours ago, Puffwagon said:

If you haven't already, download the latest beta version of afterburner. 

 

You should have no trouble getting there as mine is air cooled.

 

I'll chuck up some pointers on how to set it up if there is any interest.

 

Cheers, please do - I haven't really looked at anything other than the built in overclocking and fan control sliders.

 

When I get the box back to the office(room) I'll reinstall windows (want to RAID 0 the 2 NVME drives and the Gigabyte OEM tuning software/client has been playing up).

  • Like 1
Link to comment
Share on other sites

  • Puff
  • Gold Donating Members
  • Member For: 9y 1m 28d
  • Gender: Male
  • Location: South Australia
4 hours ago, Rab said:

RAID 0 the 2 NVME drives

 

That's one way to get your porn loaded quickly.

 

This is the page to download msi afterburner. This is the download link.

 

Go here for instructions on how to get the voltage slider working. TL;dr You open this file: [VEN_10DE&DEV_1B06&SUBSYS_120F10DE&REV_??] with wordpad and then insert the line: VDDC_Generic_Detection = 1 at the bottom of the page. If you have already saved a profile then you'll be chucking it at the bottom of the first paragraph. Save it. It's pretty easy to sort that out.

 

After you get the slider working go here for instructions to overclock using the voltage curve.

 

When you get to that point you're good to go. The gpu chooses a point on the curve based on temps. It'll take a bit of messing around to get it stable but you should have some pleasing results with how cool your cards will be.

 

Oops I almost forgot, I think you have to set each voltage curve independently which means you need to have the "sync cards" box unchecked. 

 

If you get stuck just put a post up and I'll see if I can help.

  • Like 1
Link to comment
Share on other sites

  • WOT?
  • Moderating Team
  • Member For: 11y 1m 3d
  • Gender: Male
  • Location: Frankston, 3199

Cheers :)

 

Can't get the GPU's up to 40c yet or the CPU up to 60c (38/58 is the highest they've reached so far)

 

Will be some fun blowing all up tonight ;) 

  • Like 1
Link to comment
Share on other sites

  • ...JD TUNING ADELAIDE...
  • Gold Donating Members
  • Member For: 15y 9m 26d
  • Gender: Male
  • Location: Adelaide

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'