eff xr6t Member 569 Member For: 10y 6m 19d Posted 09/03/17 01:29 AM Share Posted 09/03/17 01:29 AM What's the plan for the new motor mate? Hopefully we all get the issues from this year sorted out so we can all rep the 4l better next year. Link to comment Share on other sites More sharing options...
turboknapp Donating Members 783 Member For: 17y 26d Gender: Male Location: perth w.a Posted 09/03/17 04:07 AM Author Share Posted 09/03/17 04:07 AM I was just laughing bout the mention of the hat in the RW thread. Got a FG F6 long block, intake manifold from that is now sitting in Luke's car and Flex plate is in the back of Lazy Brennan's (car people, the best recyclers in the world) Engine has been stripped, will be sent off for machining, cleaning and check crank alignment. Following bits going in ARP Head and Main Studs Spool H Beam Rods Mahle Pistons Factory Crank - going on what you've said bout your car I may look at getting mine doweled as well. Not that I will be making as much power as you Upgraded Oil Pump housing and gears Atomic Timing Gear ACL Bearings Engine Girdle I'm still deciding what way I am going to go, but I will through the TBRE cams in to start. If I'm not a fan will just put the FG one's in it. Think I have everything, probably something I missed. I am starting assembly asap as then I may have it in before RW2018 haha 2 Link to comment Share on other sites More sharing options...
eff xr6t Member 569 Member For: 10y 6m 19d Posted 09/03/17 05:03 AM Share Posted 09/03/17 05:03 AM Sounds like it's getting all the good stuff in it should be solid when done. Yeh the doweling the crank is the only way to fix the problem I think. I'm pretty well certain mine has come loose because the car was constantly jerking at such low revs because of the big cam when driving the return road. I wanted to do it to mine last time I had it apart but I'd like to put a semi decent motor together instead of the standard scrap yard motor it has now before I go drilling an expensive flywheel.What's your plan with the old f6 Pistons and rods wanna sell them to me? Haha. Link to comment Share on other sites More sharing options...
turboknapp Donating Members 783 Member For: 17y 26d Gender: Male Location: perth w.a Posted 09/03/17 05:06 AM Author Share Posted 09/03/17 05:06 AM We can certainly talk bout it mate, happy to help out other enthusiasts where I can Link to comment Share on other sites More sharing options...
discostig Manual mode ________________________ All day, erryday Donating Members 13,798 Member For: 16y 4m 25d Gender: Male Location: Probably above atmospheric pressure Posted 09/03/17 05:13 AM Share Posted 09/03/17 05:13 AM 6 minutes ago, turboknapp said: happy to recycle where I can fixed 1 Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 18y 6m 26d Gender: Male Location: Perth Posted 09/03/17 05:14 AM Share Posted 09/03/17 05:14 AM Im fairly sure if well all dumped all the sh*t we have in our sheds in one spot we could build the #nodyno RW weapon without buying anything Im also pioneering another hashtag today #discostigneedsaGTX Link to comment Share on other sites More sharing options...
turboknapp Donating Members 783 Member For: 17y 26d Gender: Male Location: perth w.a Posted 09/03/17 05:20 AM Author Share Posted 09/03/17 05:20 AM While Mark is talking to Gav from GT Graphics, it would be a perfect time to get that sticker made as well Keen to get the cars to Roll on Racing 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now