Jump to content

Diy Tuning


Ralph Wiggum

Recommended Posts

  • Puff
  • Gold Donating Members
  • Member For: 9y 1m 28d
  • Gender: Male
  • Location: South Australia

I bought an LC-1 about 7 years ago and it still works.

 

The plastic face of the gauge has a slight crack in it from in-car heat and I had to replace the sensor once due to engine flooding.

 

I think you'd be pretty safe with this purchase.

  • Like 1
Link to comment
Share on other sites

  • Gold Donating Members
  • Member For: 8y 11m 6d
  • Gender: Male
  • Location: Canberra ACT

Thanks guys - done. Grabbed the Plus version as it wasn't much more. Just a re-release with apparently faster sampling times. Will help me learn a bit about how the AFRs behave in various circumstances before I go changing anything.

Link to comment
Share on other sites

  • Puff
  • Gold Donating Members
  • Member For: 9y 1m 28d
  • Gender: Male
  • Location: South Australia

Just a tip with output signal rates;

 

You want them fast as possible for data logging to get a more complete data set but for a self tuning, live tuning situation you want to slow the output down a bit so you get a more stable and consistent number to adjust from. As for the gauge signal rate just use whatever you prefer to look at.

Link to comment
Share on other sites

  • Puff
  • Gold Donating Members
  • Member For: 9y 1m 28d
  • Gender: Male
  • Location: South Australia

Iirc both channels are configurable on the lc1 but it's been a while since I played with the software so I can't remember what speed they are set to as default.

 

Of course things may be different as you will have a different model.

Link to comment
Share on other sites

  • Member
  • Member For: 12y 7m 3d

Ive had a MTX for a year on my turbo Rotary, sensor died within 2000km of street use.

Innovate wheren't overalls helpfull and a bit of a pain to liaise with due to time zones.

I'd made sure to wire n plumb the unit 100% as per instructions knowing the reputation the company has for warranty claims.

After explaining to them the short sensor life they just said: #cosrotary.

Well documented that the sensors don't like rich mixtures n oil in the fuel, but others have had much success with other brands in Rotaries.

My tuner does alot of rotaries and said his sensors last a lot longer than that on his dyno, hopefully I just got a dud one first up.

 

Communication to the gauge is via serial port aswell which is very 2005....

 

If I was to purchase again , I'd buy this :

 

https://www.bmotorsports.com/shop/product_info.php/cPath/103_107/products_id/357/

Edited by Ale
Link to comment
Share on other sites

  • Puff
  • Gold Donating Members
  • Member For: 9y 1m 28d
  • Gender: Male
  • Location: South Australia

It's a bummer that your sensor died so soon. Maybe the dyno one lasted longer due to tail pipe use vs dump pipe placement?

 

When I installed my lc1 into my ford it was already 5 years old. I replaced the sensor at install due to the previous one being flooded with ethanol and it hasn't had an issue for the last 10k km.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'