Jump to content

Peak Power To Rpm


gaz097

Recommended Posts

  • I'm getten too old for this s**t
  • Bronze Donating Members
  • Member For: 11y 11d
  • Gender: Male
  • Location: A big bridge over a river in South Australia

319 @ 162kph - 4550 on a Mainline

Link to comment
Share on other sites

  • Member
  • Member For: 9y 10m 10d
  • Gender: Male
  • Location: Australia

319rwkw @ 5475 rpm

Ignore the figure below, that is their "flywheel" figure, the actual figure is only 319

GFf4WbM.jpg

Edited by rollex
Link to comment
Share on other sites

  • Member
  • Member For: 9y 10m 10d
  • Gender: Male
  • Location: Australia

Everyone's rpm is a lot higher then mine. Guess I have some flow issues up high.

Not necessarily, you are making 460rwkw, you would still be making way more power than any of us at 6k, eg you are flowing fine. The reason you are making peak power lower is because you are reaching the max flow of the head/cams/turbo so it is choking up top, it is still flow very well up top though.

If your power was 350kw etc I might comment that it was just your boost curve is poor and dropping off in the top end, but 460kw is definitely going to be stretching the flow limits of everything so it sounds normal.

edit: If you overlayed your dyno curve with ours you will see what I mean, your power in the high revs will still be very high, you are just making sh*tloads more torque (probably lots of boost) hence the low figure. What turbo are you running?

Edited by rollex
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'