kgcG6ET New Member 16 Member For: 10y 5d Gender: Male Posted 26/12/14 09:32 AM Share Posted 26/12/14 09:32 AM Hi All. I am a fairly new member to the Forum and thought I would share what I drive with you. My G6E Turbo, I inherited from my brother last year and have carried out further modifications to achieve his dream of reaching low 11sec runs over the quarter. With assistance from Real Dyno Performance, 430rwkw and 920NM of torque running BP98 were achieved. At Willowbank Raceway, after some practice getting off the line, a time of 11.08sec @ 125.71mph was posted. The car is a joy to drive but care is required with the right foot. 4 Link to comment Share on other sites More sharing options...
camo86T Silver Donating Members 1,810 Member For: 10y 2m 13d Gender: Male Location: SW Sydney Posted 26/12/14 09:35 AM Share Posted 26/12/14 09:35 AM Nice ride bud!Any more details - turbo, cooler, driveline etc? Link to comment Share on other sites More sharing options...
FiftyOne Bronze Donating Members 1,145 Member For: 10y 9m 24d Gender: Male Posted 26/12/14 09:50 AM Share Posted 26/12/14 09:50 AM I don't think I've ever heard of a turbo motor in a standard setup ever getting that level of power on 98. Awesome achievement Link to comment Share on other sites More sharing options...
JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 15y 10m 25d Gender: Male Location: Adelaide Posted 26/12/14 09:59 AM Share Posted 26/12/14 09:59 AM Well if u look at the pik its a GTX3582 so quite easy infact and 125mph is suggesting a touch lower rwkw but all the same great car mate Link to comment Share on other sites More sharing options...
BenDoCo I'm getten too old for this s**t Bronze Donating Members 4,509 Member For: 11y 18d Gender: Male Location: A big bridge over a river in South Australia Posted 26/12/14 10:01 AM Share Posted 26/12/14 10:01 AM (edited) Hiya mate. Welcome to the forum.First up I gotta say "thanks" coz you are 1 of only a few queenslanders that talk in kw and not hp -- (I'm old and get confused, you see)400+ and 900+ NM with the x-over. Winner right there in my books.I'm with camo, more details please.. Full mods list, dyno sheet and would love to see the time slip oh and.............more pics coz me do like pics Edited 26/12/14 10:01 AM by BenDoCo 4 Link to comment Share on other sites More sharing options...
FiftyOne Bronze Donating Members 1,145 Member For: 10y 9m 24d Gender: Male Posted 26/12/14 10:17 AM Share Posted 26/12/14 10:17 AM X-over doesn't loose as much POWHER as people think. Infact I'd say it's an on par difference Link to comment Share on other sites More sharing options...
kgcG6ET New Member 16 Member For: 10y 5d Gender: Male Posted 27/12/14 03:36 AM Author Share Posted 27/12/14 03:36 AM The car has covered 34,000kms and has the following modifications:Walbro GSS340 fuel pumpBosch ID1000 fuel injectorsPerformance valve springsProcess West 4" pod filter intakeGarrett GTX3582R Turbo with modified flapper valve & 12psi wastegate actuatorProcess West Stage 1 IntercoolerPowerbond underdrive pulley kitTurbosmart by-pass valvePlazaman 4" Dump Pipe3.5" Catalytic ConvertorX-force stainless steel dual 2.5" exhaustChrome moly tailshaft (Hardy Spicer)HD CV HalfshaftsXR6 Turbo LSD 2.73 RatioSuperPro Diff Mount Bush KitTuned by Real Dyno PerformanceNGK Iridium spark plugsBillet Steel Oil Pump GearsHead StudsModified/Upgraded ZF Gearbox (Monsta Torque,WA) with Oil CoolerZF Tune in GearboxDBA 4000 T3 Slotted Rotors with Ferodo DS Performance Pads all roundSteel Braided brake hosesWhiteline BFR42 Sway Bar (Rear) & BFF54Z (Front)Rear Sway Bar Link PinsFront Wheels- 8.5 X 19 ICN ZESTRear Wheels - 9.5 X 19 ICN ZESTLED Chrome Protector HeadlightsAltezza LED Tail Lights 2 Link to comment Share on other sites More sharing options...
Kimberley Scott www.australianflag.org.au Donating Members 6,763 Member For: 18y 9m 8d Gender: Male Location: Brisbane Posted 27/12/14 05:19 AM Share Posted 27/12/14 05:19 AM Well if u look at the pik its a GTX3582 so quite easy infact and 125mph is suggesting a touch lower rwkw but all the same great car mateAre you calculating in single spinner I that equation? Link to comment Share on other sites More sharing options...
camo86T Silver Donating Members 1,810 Member For: 10y 2m 13d Gender: Male Location: SW Sydney Posted 27/12/14 05:30 AM Share Posted 27/12/14 05:30 AM Going by OP's mod list he has xr LSD Link to comment Share on other sites More sharing options...
kgcG6ET New Member 16 Member For: 10y 5d Gender: Male Posted 27/12/14 06:54 AM Author Share Posted 27/12/14 06:54 AM The 11.08sec run at Willowbank was done when the power was 409rwkw and torque 895NM. The 0-60' time was 1.676sec. After getting the tune tweaked by Real Dyno Performance to 432rwkw and 923NM, I gave it another go. On the first run, I got a great start with a 0-60' time of 1.659sec but hit the rev limiter in low gear which spoilt the time. On the second run, while I was loading it up on the line, the ODS HD halfshaft decided to shear off at the hub. That was the end of the night and I haven't been back due to the hot weather. It should easily get into the high 10s with a good run. Below is the Dyno Chart, a photo of a burnout at Willowbank and time sheet. 4 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now