Jump to content

Cool Stuff You Just Bought


Ralph Wiggum

Recommended Posts

  • Gold Donating Members
  • Member For: 7y 11m 10d

I dont like streched look at all, my kumho ku31 285s were pretty streched, the invo 305s are flush on my rim atm.

Got them for $290 each at St George tyres.

U got plenty of room up the back mate.

20180206_134606.jpg

Edited by BAXRTUTE
  • Like 1
Link to comment
Share on other sites

  • Silver Donating Members
  • Member For: 10y 1m 16d
  • Gender: Male
  • Location: SW Sydney

From memory you've got 10" wide +30 offset which works out pretty close to 9.5 +25 I've got on the back now

10.5 +22 will poke another 14-15mm which is pushing it

I'm not real keen about having to tweak rear guards hence looking at 285 to keep them clear...305 would be nice though

 

I'll dummy fit first and see what it's like

Link to comment
Share on other sites

  • Dropping a turd
  • Gold Donating Members
  • Member For: 16y 5m 1d
  • Gender: Male
  • Location: Perth
3 hours ago, Puffwagon said:

I just ordered some of this stuff. I'm gonna mix it up with some pool chemicals to make some super duper smelling salts.

 

ammonium%20chloride.jpg

At least its AR grade for LAB use. I use it to etch brass and bronze samples to view the microstructure.

 

DONT etch your NOSE

Link to comment
Share on other sites

  • Gold Donating Members
  • Member For: 7y 11m 10d
8 hours ago, camo86T said:

From memory you've got 10" wide +30 offset which works out pretty close to 9.5 +25 I've got on the back now

10.5 +22 will poke another 14-15mm which is pushing it

I'm not real keen about having to tweak rear guards hence looking at 285 to keep them clear...305 would be nice though

 

I'll dummy fit first and see what it's like

Fg has about 15mm extra room to the guard from the hub compared to a BA by memory.

@OZYWALKER had 9.75s with 295 invos that fitted fine, what offset did u have Dan?

Link to comment
Share on other sites

  • All stock bar the k&n panel filter
  • Silver Donating Members
  • Member For: 12y 15d
  • Gender: Male
  • Location: Perth
12 hours ago, Puffwagon said:

I just ordered some of this stuff. I'm gonna mix it up with some pool chemicals to make some super duper smelling salts.

 

ammonium%20chloride.jpg

 

This seems like a really farking terrible idea. Just smoke some meth and be done with it, none of this gateway drug bullsh*t.

  • Like 1
Link to comment
Share on other sites

  • XR50T
  • Gold Donating Members
  • Member For: 10y 10m 27d
  • Gender: Male
  • Location: Western Sydney
From memory you've got 10" wide +30 offset which works out pretty close to 9.5 +25 I've got on the back now
10.5 +22 will poke another 14-15mm which is pushing it
I'm not real keen about having to tweak rear guards hence looking at 285 to keep them clear...305 would be nice though
 
I'll dummy fit first and see what it's like
Probably gonna have to roll or trim the inner lip on the rear guards.
Should get away with a 5-10mm trim.
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'