JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 15y 10m 19d Gender: Male Location: Adelaide Posted 09/06/17 10:54 PM Share Posted 09/06/17 10:54 PM Nice seen some crazy stuff in my time but just go the forklift instead ? Link to comment Share on other sites More sharing options...
bossmang FREAKY Donating Members 12,403 Member For: 14y 3m 24d Gender: Male Location: Melbourne Posted 09/06/17 11:31 PM Share Posted 09/06/17 11:31 PM bugger cant find the photo anymore Link to comment Share on other sites More sharing options...
El Andrew Gold Donating Members 2,019 Member For: 8y 11m 27d Gender: Male Location: Canberra ACT Posted 10/06/17 01:04 AM Share Posted 10/06/17 01:04 AM 12 hours ago, Ralph Wiggum said: Remove the bumper cover, rotate the exhaust 90dege so the bends are horizontal and the opening the in the tube is facing the diff centre and swing the muffler out past where the bumper would normally be (it winds up sticking behind the rh rear wheel) start feeding the pipe over the cradle. Once you've got the flange past the cradle start to rotate the exhaust back into the correct position as you wiggle it forward. Thanks for that! The exhaust place around the corner said they would chuck it in for 50 bucks this morning. Ended up doing that because I'd been promising the kids I would get cracking on a cubby house this weekend and didn't want to piss more time away on the car. Probably for the best - they had a pig of a time getting it to clear the cradle. For what I want, that exhaust is absolutely perfect. Sounds great at WOT and on overrun, but subtle in normal driving. Slightly meatier idle but not intrusive at all. Just need to muck around with the tailpipe alignment a bit. 2 Link to comment Share on other sites More sharing options...
discostig Manual mode ________________________ All day, erryday Donating Members 13,798 Member For: 16y 4m 25d Gender: Male Location: Probably above atmospheric pressure Posted 11/06/17 12:49 AM Share Posted 11/06/17 12:49 AM Rolled tips FTW 1 Link to comment Share on other sites More sharing options...
Wilko16 Donating Members 1,672 Member For: 16y 4m 28d Gender: Male Location: Melbourne Posted 11/06/17 07:33 AM Share Posted 11/06/17 07:33 AM ZF fluid change 4 litres out 4 new litres in Drive around the block 4 litres out again 4 new litres back in Another drive, nice smooth gearshifts Well worth it :-) 4 Link to comment Share on other sites More sharing options...
NathanB Member 136 Member For: 10y 10m 25d Gender: Male Location: Melbourne Posted 23/06/17 08:36 AM Share Posted 23/06/17 08:36 AM Filter is much cleaner now photos don't do it justice. Thing was filthy! 1 Link to comment Share on other sites More sharing options...
discostig Manual mode ________________________ All day, erryday Donating Members 13,798 Member For: 16y 4m 25d Gender: Male Location: Probably above atmospheric pressure Posted 24/06/17 02:29 AM Share Posted 24/06/17 02:29 AM Yesterday, but anyway Car suddenly started sliding out around a corner, can see it wiggle a bit before I caught it here on dashcam. The unrelated rumble before turning is the dodgy road surface on the right hand side, rumbling after corner is the tyre! ... Pulled over after the bend, gingerly... Swapped out to the stylishly mismatched spare on the side of the road. Very lucky a tyre shop was literally 1km away. Seems I had a nice hole in the tyre I didn't know about! Flat, overheating tyre = no integrity = unexpected drift competition. Annoyed I didn't feel it...but glad the Advan rim was unaffected! Cleaned it and looked for damage, all good. High profile 245/45/17 FTW. Tiny bit of rash but I've copped worse from the narrow roads I'm having to park on at work now. 4 Link to comment Share on other sites More sharing options...
El Andrew Gold Donating Members 2,019 Member For: 8y 11m 27d Gender: Male Location: Canberra ACT Posted 24/06/17 10:03 AM Share Posted 24/06/17 10:03 AM +1 for having an impact wrench in the car 1 Link to comment Share on other sites More sharing options...
discostig Manual mode ________________________ All day, erryday Donating Members 13,798 Member For: 16y 4m 25d Gender: Male Location: Probably above atmospheric pressure Posted 27/06/17 05:16 AM Share Posted 27/06/17 05:16 AM Hahah yeah it's a cordless drill, happy coincidence since I've been using it at work a little I decided to leave it in the car, and previously bought the adapter kit so it can take 1/2, 3/8 and 1/4 inch sockets for faster home wheel removal/refit if servicing brakes etc. The new rims require a thin deep socket to remove the nuts so that lives in the car on a bar too, easy to swap over. Just missing the torque wrench from the wheel change kit now, not keen on leaving that in the boot to get hot/cold all the time. Link to comment Share on other sites More sharing options...
discostig Manual mode ________________________ All day, erryday Donating Members 13,798 Member For: 16y 4m 25d Gender: Male Location: Probably above atmospheric pressure Posted 09/07/17 02:55 AM Share Posted 09/07/17 02:55 AM Out with the old in with the new PS Got my money's worth! 3 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now