k31th less WHY; more WOT Site Developer 28,291 Member For: 16y 8d Gender: Male Location: Melbourne Posted 21/05/17 10:19 AM Share Posted 21/05/17 10:19 AM a third of the value I bought my car for, approximately, for that cruise haha totally worth it, though. 2 Link to comment Share on other sites More sharing options...
Puffwagon Puff Gold Donating Members 15,115 Member For: 9y 2m 20d Gender: Male Location: South Australia Posted 21/05/17 10:25 AM Share Posted 21/05/17 10:25 AM Lol mine is closer to half and hasn't been fixed or paid for yet 1 Link to comment Share on other sites More sharing options...
bupalooga Silver Donating Members 255 Member For: 11y 6m 12d Gender: Male Location: Griffith NSW Posted 21/05/17 10:51 AM Share Posted 21/05/17 10:51 AM 3 hours ago, bamk2f6tornado said: Also you say you ordered a hub assembly?? I'm assuming this is for the front? If not the Ute's don't have a separate hub it's all one big peice mate A mate said to buy a whole assembly rather than just the bearing as that's what they usually do where he works & it would be a sh*tload easier as I don't have a press. Well this is what I ordered anyway. Link to comment Share on other sites More sharing options...
bossmang FREAKY Donating Members 12,403 Member For: 14y 3m 24d Gender: Male Location: Melbourne Posted 21/05/17 11:30 AM Share Posted 21/05/17 11:30 AM train horn bupalooga??? Link to comment Share on other sites More sharing options...
FiftyOne Bronze Donating Members 1,145 Member For: 10y 9m 17d Gender: Male Posted 21/05/17 11:42 AM Share Posted 21/05/17 11:42 AM 1 hour ago, k31th said: lol because of the spanner abuse? Yeah, I think its because you're condeming a really nice tool for the rest of your life and the tools life to that crappy job you had to do once. And you'll always see it in the draw and it'll stare back at you, taunting you because you know you'll have to do that job again one day in the future.... Link to comment Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 28,291 Member For: 16y 8d Gender: Male Location: Melbourne Posted 21/05/17 11:46 AM Share Posted 21/05/17 11:46 AM haha, the spanner is fine. It just doesn't work when it's on the backward (forward?) face as well as it once did. It was 100% worth it on a cheap spanner. Plus, I have two 13mm spanners Link to comment Share on other sites More sharing options...
Rab WOT? Moderating Team 10,980 Member For: 11y 1m 24d Gender: Male Location: Frankston, 3199 Posted 21/05/17 11:55 AM Share Posted 21/05/17 11:55 AM A tool is good if it does the job - sounds like a good tool 1 Link to comment Share on other sites More sharing options...
bupalooga Silver Donating Members 255 Member For: 11y 6m 12d Gender: Male Location: Griffith NSW Posted 21/05/17 12:27 PM Share Posted 21/05/17 12:27 PM 54 minutes ago, Ford Freak said: train horn bupalooga??? Hehe Yep! Ill have to start my own Train horn pranks channel 2 Link to comment Share on other sites More sharing options...
Puffwagon Puff Gold Donating Members 15,115 Member For: 9y 2m 20d Gender: Male Location: South Australia Posted 21/05/17 12:37 PM Share Posted 21/05/17 12:37 PM 40 minutes ago, Rab said: A tool is good if it does the job - sounds like a good tool I asked my wife if I could make a witty post about her from that quote. She said no Link to comment Share on other sites More sharing options...
bamk2f6tornado Bronze Donating Members 777 Member For: 10y 4m 15d Gender: Male Location: Rockhampton Qld Posted 22/05/17 06:04 AM Share Posted 22/05/17 06:04 AM A mate said to buy a whole assembly rather than just the bearing as that's what they usually do where he works & it would be a sh*tload easier as I don't have a press. Well this is what I ordered anyway.Your mate has taken a marijuana. That ebay listing seems to be for a sedan with the wrong description/photo. You want one of these. http://m.ebay.com.au/itm/FORD-FALCON-UTES-PANEL-VANS-XH-AU-BA-BF-FG-XR6-XR6T-XR8-REAR-WHEEL-BEARINGS-2-/301456633363?nav=SEARCHRepco is cheaper than this and they supply a Timken bearing inside a repco box. About $40 each side if I remember correctly. If you want to do the front bearings then yes it is easier to buy the whole hub as the bearing comes pressed in. Not the case for the rears mate. Just remove the bearing yourself and take the bare axle into a suspension shop n they will charge you bugger all to press the new stuff on mate 2 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now