Jump to content

Where Is The Electrical Plug For Towing On Ba Xr6 Turbo?


Recommended Posts

  • Bronze Donating Members
  • Member For: 12y 1m 7d

Hi All,

I have a space to bolt on the tow bar at the rear of my BA (tow bar is in the boot and came with the car when purchased) as per photo, however there is no fitting it appears for the electrical plug for the trailer lights. Does anyone know where is it or if there is a special fitting I need to buy or install?

post-50285-0-99118300-1331597747_thumb.j

Link to comment
Share on other sites

  • I am dissatisfied with my current employment situation
  • Donating Members
  • Member For: 17y 6m 21d
  • Gender: Male

Think they all have the plug.. It in the boot on the rhs under carpet behind tail light..

My car doesnt have tow pack but spare plug there

Link to comment
Share on other sites

  • Talks Cheap, Let's Race
  • Member
  • Member For: 17y 5m 3d
  • Gender: Male
  • Location: Atherton, FNQ

my turbo has the wiring for the trailer plug in the harness under the rh side tail light, you have to pull up the carpet and remove the liner on the side of the boot to get at it

Link to comment
Share on other sites

  • 5 years later...
  • Cruise Whore
  • Moderating Team
  • Member For: 18y 8m 13d
  • Gender: Male
  • Location: Melbourne

Anyone know where I can buy a plug to suit this PWR 12V DC connector? Its in the boot loom RH side under the wall lining. Thanks. 

 

k1TXqQ4.jpg

 

OimEWWB.jpg

 

Link to comment
Share on other sites

  • Puff
  • Gold Donating Members
  • Member For: 9y 2m 20d
  • Gender: Male
  • Location: South Australia

I bought mine from eBay Gaz.

 

It was $70 delivered from a seller called adelaideparts.

 

Edit: It was a genuine bf sedan towbar wiring loom with reverse sensor and 12 pin plug. 

 

I'm not sure if that's what you mean? 

Edited by Puffwagon
Link to comment
Share on other sites

  • Cruise Whore
  • Moderating Team
  • Member For: 18y 8m 13d
  • Gender: Male
  • Location: Melbourne

Thanks Puff.  I'm after the actual mating plug for the existing socket circled.  The 2 pins supply 12V DC (actually 11V measured) and I'm planning on hooking it up to a Cig Lighter socket so I can provide a Cig Lighter socket in the boot for things that need 12V DC power.  I found its always ON so I'll put a switch in-line as well.

 

Went to Ford, Repco, Jaycar and Altronics and none have the plug.  They all suggested I visit a wreckers and cut off the plug from a towbar loom that plugs into it.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'