evo

I just put my F6 up for sale if you are keen http://www.carsales.com.au/private/details/Ford-Performance-Vehicles-F6-2008/SSE-AD-3027571/?Cr=1&sdmvc=1

My drivers side guard scrubs more than the passenger side. Its strange but the wheel sticks out a little more on one side, you'll find the rear is the same. A lot of cars are like this.

I have 20x9" +18 on front, just scrubs with 245/35/20 tyres - its very low at the front. 20x10" +18 rear, 275/35/20 tyres, heaps of room, probably another 10mm with lowered leaf springs and 1" block. You wont need to roll bjwortley

It will but depends how low the front is, if its low it will probably rub the guard on every bump

That's correct mate, got plenty of clearance with no spacers and guard pump. The fronts scrub on bumps though, may need skinner front tyres, currently have 245/35/20 on front.

20x9+18 - king spring front springs ssl 20x10 +18 - king spring ssl leafs and 1" block in rear (rear guards been pumped slightly so could fit 15mm spacers)

Yeah that's it mate, I think they suit quite well. the chrome ones would look crap on it though. Also probably suits a darker colour paint with the black insides. Yeah the 20's a perfect except the tyres are scrubbing on big bumps badly, even with the front guards rolled. I might throw on some 20mm bolt on spacers on the rear, the 10" +18 offset still sits in to far for me lol

Yeah I went the DRL headlights, while I was down at mars performance picking them up they asked If they could take pictures of the tail lights for autocad drafting. They are going to make LED tail lights for the FG ute (about time someone did). I will have first set, apparently they are going to make 3 different versions. Also went to HWY meet in Ringwood the other night, left pretty early when the police started blocking off entrances.

Cheers guys, yeah the tyres need some gloss tyre shine to make it look perfect. I've thought about 1" lowering block, I used them on a hilux before but with this amount of power etc im not 100% sure on them, have you used them on yours before? The wheels are actually a copy of a dodge viper wheel from the USA, there's no manufacture as its just a replica wheel. by the way, I have more grip now with the 275's on the rear, now I can keep traction in 4th lol

as requested mate although I need to lower it in the rear more. I have kingspring FOR-303SL in them, should I reset the standard leaf springs? I have them in the shed still.. I think it has Ultra Lows (aka SSL) in the front. removed mud flaps while the wheels were off. wheels specs below... 20x9 +18 front with 245/35/20 20x10 + 18 rear with 275/30/20

just bought some wheels from USA, fedex over in 4 days, sh*ts over auspost lol pics to come soon when this rain pisses off, specs are: 20x9 +18 front - test fitted, lil bit of poke but no tyres fitted yet so wasn't a true measure. 20x10 +18 rear - sits in around 15mm or so, no tyres either so wasn't a true measure (might use bolt on spacers if needed) Going on fpv f6 fg ute sneak peak picture attached...black gloss, multi spoke concave, 20"x10"+18 wheel

Yeah shes a real nice ute mate, love it. more mods to come. it just has the basics mate. cooler & piping kit, cat, intake kit, flash tune. I've just installed an amp+sub, HID lights, 20" wheels from USA (photos soon to come), custom exhaust...I had a bloke put together dual 3" flute tips, the rest will be welded together soon

yeah not going ahead with the S2 lights, not worth the effort as mentioned. Also the DRL lights for FPV F6 (same as XT) look alright in black...I am considering them now. I have HID's in the standard headlights and the light is scattered a tad, I see some people flicking down their rear view mirror lol.