Jump to content

beau-s

Member
  • Posts

    6
  • Joined

  • Last visited

Reputation

0 Neutral
  1. Just general parts really.. Caliper rebuild Kits.. Hoses, belts, all that sorta stuff...
  2. Umm sorry didn't quite understand that there.. Do you mean nobody around here has a good personality?? Sorry bit lost..
  3. Hey guys how are you? I'm from the penrith area and am chasing a few parts for my car, but am sick of all the parts places around here that have asbsolutely no idea on customer service.. If they don't have the part there the phone calls as good as over, its always "aww I'd have to make a phone call on that" or "sorry don't have it here can't help you" Just wondering if anybody knows anywhere around that's half decent at all?? I'm always working on cars and ordering bits but havent had a good experience yet.. Thanks
  4. Thanks heaps for the replys guys.. Isn't it weird that nobody at all knew that?? Even some very well known performance shops specializing in those cars.. Any one know how much extra oil I should be putting in through the switch?? I tried getting a 22 or 21mm ring spanner over the switch, but couldn't get it past where the wires themselves go into the switch..
  5. Hey scotty thanks heaps for your reply.. I'm from penrith area Nsw.. Everyone I've talked to around here only fill to the plug..
  6. hey guys how are you? I know this has probably been covered a few times before but I couldnt find anything definate.. I have a BA MK2 6 speed manual and have noticed a bit of a oil leak coming from the gearbox, took it to a gearbox and diff specialist to be fixed. How much oil should be put into this gearbox? Ive rang heaps of places, with different answers - Ford dealer 1 - just fill to fill plug Ford dealer 2 - fill using the drain plug?? (apparantly they have a special tool to do it) heaps of performance shops and they all just fill to the fill plug. should I add extra oil to the box or is to the fill plug enough?? and if so, where from? I tried removing the reverse switch but couldnt get a spanner to fit on it without fouling on the box?? any help would be GREATLY appreciated, and im really sorry if this has been covered before, its just really confusing.. Beau.
×
  • Create New...
'