Leaderboard

The cam timing is more retarded at idle and cruise by about 10 degrees which makes it quieter.

Dear Community, my name is Riccardo and I hope that you can help me out, because nobody in Europe has ever heard of the BTR/ION/DSI transmission. I bought my childhood dream, a Maserati 3200 GT which has the M72 version installed and that gives me a tremendous headache. On my first "real" test drive the transmission decided to fail. The car is not moving forward or backwards. Since there is nobody who knows anything about the transmission, I took action myself and disassembled it. Turns out 2 clutch packs are burned and the planetary has gotten a lot of wear, so it can not be reused. After some months I came across a used auto transmission, put it into the car, but the same problem still occured. So I guess the torque converter is broken and has caused the prior damage. My reasearch about BTR always leads to Australia, but when I try to look something up, I can hardly find anything. It is not possible for me to find parts on e.g. Ebay or other websites. (Guess they are bind to specific locations) Have already tried to message some Youtubers and companies, but never received a reply. This is why I am hoping to find some infos in here. I´d be happy if someone would tell me a source for parts, alternatives or any which will help me putting a working transmission back into the car, so I can eventually enjoy it. I´m open to modifications, swaps, conversations to a manual etc. Any knowledge, hints or tips are highly appreciated ! Lots of greetings from Italy Riccardo

Gave the boost tee two more turns today and it did fark all. No doubt there is something there but the seat of the pants was lacklustre. Pretty sure I can have my custom four inch turbo back system installed in a few hours. Gotta cut an shut a bit of it but the parts are here and I'm getting antsy. Hopefully it's not too loud lol

safe as houses

Seen this today

I'm exactly the same as you. I'm just going through the process of tidying my engine bay. Nexus R5 and new wiring loom etc...

So yeah nothing much exciting going on really, I fixed a wiring issue on the territory today that prevented being able to manually shift gears. Now I can stall it up in 2nd gear, 3500rpm, full boost which is around 16psi and let it rip. It goes ok but it's probably just as quick using first gear. Nothing a bit more power wouldn't fix though

Yes. NOS = New old stock. I have lots of parts. Bezels, inserts, undertrays, grill mount and top sections... I also collected a lot of other BA/BF parts- NOS dash pad, door rubbers, weather strips, headlights, boot lids, quarter panels etc. The way I see it, is if you want to drive it. you have to be able to fix it... BA/BF will be like all other cars. parts will very soon be hard to get and buyers will be forced to pay a premium to restore/repair their cars.. After all, my car is almost 20 years old. 10 years to go before it can be placed on club rego...

morning all, happy Saturday 📨

I've found "quilton" does the job no finger-through-the-paper problems haha morning all, happy Friday 📧

clearly the latter... only certain brands are acceptable and don't rip as soon as you go to grab a couple of squares

In other news the missus bought a different brand of tp recently. Do they actually test how strong the paper is or do they just cut down a tree, mush it up and call it good?

Super tidy engine bay. Love it

Hi all, it's been a while.. I couldn't get the VN ready in time for Rockynats, so I put some time in to the old girl and got her mobile again. As I had to pull the IRS to replace the outer diff support bushes, I decided to finally assemble the Try Trac that has been sitting in the shed for the past 4 years. While I was at it, I put a new set of Dana gears, so that I didn't have to cannibalise the centre that was being removed. Having missed all previous Rocky Nats due to work, I decided that I was not going to miss another. I have a great time, met many wonderful people and checked out some really cool rides. I didn't take any pics of the car, but I found some on the Nat page that I have shared below. I have also included a current pic of the bay. It has changed somewhat and looks a lot neater. The car was running really crappy, which is why I haven't really been interested in it. My tuna (Joke) installed the latest firmware update and utilised the new manifold pressure predication vs fuel table, car now runs like factory, no more hunting at idle, or stalling. For the first time in a while, I can honestly say that I really enjoy driving the car again. I have also started to make some carbon parts again, although it has been somewhat of a learning curve. I am currently toying with a new rocker garnish to suit the FG rocker cover (1st attempt failed due to air leak in the bagging, so I laid up a new one in the mould tonight) and will soon start on a modified version of the radiator sight cover. I will also have to find some time to remove the dash, as the dreaded mixer shaft failure has finally eventuated. FML Until next time... 🍺

This is why you're posting in the Coversions, Transplants and FRANKENSTEINS page haha What you're talking about is a big and ambitious job! That's why I, for one, am so excited to follow your journey. Even if you don't do it, it's really cool to see the fact finding process

awesome! I'm keen to follow your build! If you need a hand with homework, let us know. There's always someone around who's interested in helping out